Aspire Odan Mini Sub-Ohm Tank

A 25mm sub-ohm tank built from 304 stainless steel with quartz-reinforced glass, a self-sealing coil housing, and triple adjustable bottom airflow. The Aspire Odan Mini holds 2ml with the standard glass or 4ml with the included diamond bubble glass, fills from the top via a slide-open cap, and takes Aspire Odan mesh coils in 0.2Ω and 0.3Ω. 

One of each coil ships in the box. Thread it onto any mod with a 510 connection, fill it with High-VG Shortfill, and it runs. Pirate Vapes ships the Odan Mini with tracked age-verified UK delivery.

Why do vapers choose this:

• 304 stainless steel construction with a polished PVD coating. Built to last, resistant to daily wear, and available in six finishes that actually look good on a mod.

• Quartz-reinforced glass. Stronger than standard borosilicate. Less likely to crack from a bump or a drop.

• Self-sealing coil housing. The e-liquid sits in the tank without touching the chimney, which reduces spit-back and keeps the draw clean. A small engineering detail that makes a noticeable difference.

• 80/20 linen and organic cotton wicking. Not standard cotton. The linen fibre blend absorbs e-liquid more consistently, which means fewer dry hits when chain-vaping and cleaner flavour extraction across the coil’s life.

• Two coils included. The 0.2Ω mesh comes pre-installed, and a 0.3Ω coil ships in the box alongside it. You can start vaping straight away and have a spare ready.

• Triple adjustable bottom airflow. Three airflow slots at the base of the tank, all independently adjustable. You can fine-tune the draw from a restricted DTL to a wide-open lung hit.

Available Colours

#buttons

• Dark Blue
• Emerald
• Rainbow
• Stainless Steel
• Smoky Quartz
• Black

Aspire Odan Mini Sub-Ohm Tank Features

Push Top Fill System

Slide the top cap to one side, and it reveals a single fill port. No unscrewing, no removing the drip tip, no hunting for a hidden latch. The mechanism is spring-loaded, so it slides shut and seals when you let go. Refilling takes a few seconds and works with any standard shortfill nozzle.

Self-Sealing Coil Housing

The Odan Mini uses a coil housing design that isolates the e-liquid from the chimney. In practical terms, this means the liquid only contacts the coil and wick, not the air path above it. The result is less spit-back, less gurgling, and a cleaner draw from the first hit to the last. It is one of the features that sets the Odan Mini apart from more basic sub-ohm tanks.

Aspire Odan Coil Series

The tank ships with two coils. The 0.2Ω mesh coil comes pre-installed and is the higher-power option: more vapour, more flavour intensity, suited to 50W and above. The 0.3Ω mesh coil is included in the box and runs at a slightly lower wattage with a cooler, smoother draw. Both use the 80/20 linen and organic cotton wicking blend. Replacement Aspire Odan coils are sold separately in packs of three.

810 Honeycomb Resin Drip Tip

Wide-bore 810 fitting for open airflow, with a honeycomb resin pattern that gives each colour variant a slightly different look. The resin stays cooler on the lips than metal or plastic tips during extended sessions.

Diamond Bubble Glass

The standard glass gives you a 2 mL capacity (TPD compliant). The diamond bubble glass, included in the box, expands capacity to 4ml. The bubble shape sits flush with the tank body, and the diamond pattern adds a textural detail that matches the overall design. If you vape heavily on high-VG shortfills, the 4ml glass means fewer refills through the day.

What E-Liquid to Use

High VG. 60/40 or thicker. The Odan Mini is a sub-ohm DTL tank running mesh coils below 1.0Ω, and it is designed for thick shortfill e-liquids. Fruits, desserts, menthols, bakery flavours: whatever you prefer, keep the VG at 60% or above. Do not put nic salts or thin 50/50 liquids through this tank.

The coils are not designed for it, and the high wattage will deliver too much nicotine too fast. For sub-ohm vaping, 6mg nicotine strength or lower is recommended. Browse our e-liquid range at Pirate Vapes for shortfills that pair well with sub-ohm tanks.

How to Set Up the Aspire Odan Mini

1. Unscrew the base and ensure the pre-installed coil is pushed firmly into place.

2. Drip 3–4 drops of e-liquid directly onto the coil's exposed cotton ports.

3. Pull off the 2ml tube and press on the 4ml diamond glass if you want more capacity.

4. Screw the base back on and thread the tank onto your mod's 510 connection.

5. Push the top cap open, fill the tank, and let it spring shut.

6. Let it sit before firing so the thick liquid fully saturates the linen-cotton blend.

Start at 40W to break in the coil, adjust the bottom airflow, and ramp up to 50W+.

What’s in the Box

• 1 x Aspire Odan Mini Sub-Ohm Tank

• 1 x Aspire Odan 0.2Ω Mesh Coil (pre-installed)

• 1 x Aspire Odan 0.3Ω Coil

• 1 x Diamond Bubble Glass (4ml)

• 1 x User Manual

• 1 x Warranty Card

Compatibility

The Aspire Odan Mini uses a standard 510 threaded connection, which means it fits the vast majority of vape mods on the market. If your mod has a 510 connector and can fire at the wattage the Odan coils need (typically 50W and above for the 0.2Ω, slightly less for the 0.3Ω), it will work.

The tank uses Aspire Odan coils only. Not Aspire Nautilus, not Aspire PockeX, not any other Aspire coil range. Make sure you order the correct coils when restocking. Pirate Vapes stocks the Odan Mini tank and the Aspire Odan replacement coils together in our Aspire Range.

About Aspire

Aspire has been making vape hardware since the early days of the UK vaping market. The Nautilus range defined MTL Vaping for years, and the Odan series brought that same build quality to sub-ohm DTL Tanks. The Odan Mini is the compact version of the full-size Odan, designed for vapers who want the flavour and cloud production of a sub-ohm tank in a smaller, more portable form.

The 304 stainless steel construction, quartz glass, and self-sealing coil housing reflect Aspire’s focus on durability and clean engineering. It is a tank built to sit on a mod for months without showing wear.

Stock Up and Save

The tank ships with two coils, but they will not last forever. Having a pack of replacement Aspire Odan coils ready means you are never stuck with a burnt coil and a tank you cannot use. Add a shortfill alongside the coils and your order is sorted.

Pirate Vapes sends everything in plain packaging, tracked to your door, age-verified checkout, and 18+ delivery. Crew Rewards points go on every order. If you want coils arriving without thinking about it, set up The Crow’s Nest at Pirate Vapes, and they come on repeat with a saving.

Conclusion

25mm sub-ohm tank. 304 stainless steel with quartz-reinforced glass. 2ml standard capacity, 4ml with the included diamond bubble glass. Self-sealing coil housing for a clean, spit-free draw.

Triple adjustable bottom airflow. Push-top fill. Two Aspire Odan mesh coils included (0.2Ω pre-installed, 0.3Ω spare). 80/20 linen and organic cotton wicking. 510 connection. Available in six colours. Grab one from Pirate Vapes with tracked, age-verified UK delivery.

FAQs

What is the e-liquid capacity?

2ml with the standard glass (TPD compliant). 4ml with the diamond bubble glass, which is included in the box.

Which coils does it use?

Aspire Odan coils. The tank ships with a 0.2Ω mesh coil (pre-installed) and a 0.3Ω coil. Replacement coils are sold separately in packs of three.

Will it fit my mod?

If your mod has a 510 connection and can fire at 50W or above, it will work. The 510 thread is the standard connection for sub-ohm tanks.

What e-liquid should I use?

High-VG shortfills. 60/40 VG/PG or thicker. Do not use nic salts or thin 50/50 liquids. For sub-ohm vaping, 6mg nicotine or lower is recommended.

How do I fill the tank?

Slide the top cap to reveal the fill port. Fill around the central chimney. Let the cap spring back to seal.

How do I change the coil?

Pull the old coil out of the base of the tank. Push the new one in until it seats. Prime it with a few drops of e-liquid, fill the tank, and wait five minutes before vaping.

Is the diamond bubble glass included?

Yes. The 4ml diamond bubble glass is included in the box alongside the standard 2ml glass.

What colours are available?

Dark Blue, Emerald, Rainbow, Stainless Steel, Smoky Quartz, and Black.

Is this suitable for mouth-to-lung vaping?

The Odan Mini is designed primarily for DTL sub-ohm vaping. The airflow can be restricted, but it is not an MTL tank. If you want a tight cigarette-style draw, this is not the right tank.

Does Pirate Vapes stock the replacement coils?

Yes. Aspire Odan replacement coils are in our Aspire range at Pirate Vapes.