Freemax Marvos CRC Replacement Pod

The empty pod shell for Freemax's Marvos range. 2ml TPD-compliant capacity, PCTG construction, child-resistant top cap certified to ISO 8317, and a press-fit coil slot that accepts every coil in the Freemax MS and MS-D mesh series. 

Four magnets on the base lock the pod onto your Marvos device, and a removable 810 wide-bore drip tip gives you a proper DTL mouthpiece rather than a narrow pod-style opening. 

Sold individually. Coils are purchased separately, which means you only replace the pod when the housing itself needs it, not every time a coil burns out. Browse the full Replacement Pods range at Pirate Vapes. Over 18s only.

Why vapers choose this:

• ISO 8317 child-resistant cap with a lift-and-slide mechanism that meets international safety certification, important if your kit sits on a desk or kitchen counter

• Press-fit coil swap means you keep the pod shell and only replace the coil inside, which cuts your running costs compared to sealed-coil pod systems

• Four-magnet base locks the pod firmly onto Marvos devices and resists accidental separation from bumps or drops

• PCTG construction handles heat better than standard plastics and resists cracking from repeated e-liquid exposure

• 810 drip tip is removable and replaceable if you prefer a different mouthpiece shape or bore width

Freemax Marvos CRC Replacement Pod Features

Child-Resistant and It Actually Works

A lot of vape products claim child resistance. The Marvos CRC pod holds ISO 8317 certification, which is the international standard for child-resistant packaging. The top cap does not simply pull off. You lift it upward and slide it sideways to expose the fill port. 

That two-step motion is simple for adults and genuinely difficult for small children. Fair point: it adds half a second to your refill routine. Worth it if you have kids in the house.

Press-Fit Coils Keep Things Cheap

This is the reason a pod with swappable coils matters. Sealed-coil pods force you to bin the entire cartridge when the coil degrades. The Marvos CRC lets you push a fresh Freemax Coil into the same pod housing and carry on. 

A pack of five MS-D coils costs less than five sealed pods would, and the pod shell itself lasts through multiple coil changes before it needs replacing.

That 810 Mouthpiece

Not a narrow pod mouthpiece. The Marvos CRC uses a full 810 wide-bore drip tip, the same style you find on dedicated DTL Tanks. More air, warmer vapour, bigger clouds. The drip tip pops out, so if you prefer a different shape or material, any standard 810 tip will fit.

PCTG Holds Up

The pod body is moulded from PCTG, a food-grade plastic that handles temperature swings better than standard polycarbonate. 

It does not crack from citrus or menthol e-liquids the way some cheaper plastics do, and it stays clear longer so you can see your liquid level without guessing. At 26mm diameter, it is wider than most pod cartridges, which is part of what gives it the tank-like feel.

Magnets That Actually Hold

Four magnets on the base plate. Not two, not a friction fit, not a clip mechanism. The pod drops into the Marvos mod and locks with an audible snap. 

Freemax tested the magnet strength against drops and daily handling, and the connection stays firm through pocket carry and bag storage. You can pull the pod out deliberately without much force, but it will not come loose on its own.

Freemax Marvos CRC Compatible Coils

The pod accepts two coil families. Both use Freemax's SS904L mesh and their signature tea fibre cotton wicking, but the MS-D range adds Freemax's Double-D parallel mesh structure from their FM COILTECH 5.0 platform.

MS Mesh Coils (FM COILTECH 4.0):

• 0.15ohm: 60 to 80W. Full DTL clouds and strong flavour. The most popular choice for high-wattage Marvos setups.

• 0.25ohm: 40 to 60W. Slightly restricted draw with cleaner, cooler flavour. Good middle ground.

• 0.35ohm: 30 to 40W. Tighter RDL draw. Works well at moderate wattage for vapers who want flavour density without the heat.

• 0.5ohm: 20 to 30W. The lowest wattage option. Restricted lung hit with extended coil life.

MS-D Mesh Coils (FM COILTECH 5.0, Double-D Mesh):

• 0.15ohm: 60 to 80W. Parallel mesh structure heats faster and spreads heat across a wider surface. Best at around 75W.

• 0.25ohm: 30 to 50W. Balanced draw with the improved flavour clarity of the Double-D mesh. Best at around 45W.

Browse the full Vape Coils collection at Pirate Vapes for availability.

How to Set Up the Freemax Marvos CRC Replacement Pod

New pod, new coil, ready in under five minutes.

1. Unpack the pod and remove any protective caps. Check the interior of the pod for any packaging inserts.

2. Take your chosen MS or MS-D coil and press it firmly into the base of the pod until you feel it click into place. The press-fit mechanism is snug by design, so push with steady pressure.

3. Apply four to five drops of e-liquid directly onto the exposed cotton ports on the coil. Tilt the coil slightly to ensure each port gets saturated.

4. Lift and slide the child-resistant top cap to expose the fill port. Fill with High VG E-Liquid to just below the maximum line. Slide the cap back until it locks.

5. Leave the pod standing upright for a solid five minutes. Tea fibre cotton absorbs differently from standard cotton. It pulls liquid steadily but needs the full soak time to saturate the inner layers of the mesh. Cutting this short burns the cotton permanently and ruins your first coil.

6. Insert the pod into your Marvos device. The magnets will seat it. Start at the low end of your coil's rated wattage and increase by 5W increments until you find the sweet spot.

What's in the Freemax Marvos CRC Replacement Pod Box

One Marvos CRC replacement pod with child-resistant top cap and removable 810 drip tip. That is it. No coil, no e-liquid, no device, no charging cable. This is the pod shell only. 

You will need to purchase a compatible MS or MS-D coil separately, and pair it with your preferred e-liquid. The Vape Pods section has all available pod options.

Built for the Entire Marvos Lineup

The CRC pod fits every device in Freemax's Marvos family. That means the Marvos X 100W, the Marvos T 80W, the Marvos S 80W, and the Marvos 60W. Same pod, same magnets, same coil platform across all four devices. If your Marvos mod works, this pod fits it.

It does not fit Freemax devices outside the Marvos range. The Maxus Pro, the Fireluke tanks, the Galex, and the Twister each run on their own coil and pod systems. Different dimensions, different coil platforms, different connections entirely. Stick to Marvos-compatible stock, and you are fine.

About Freemax

Freemax built their reputation on mesh coil engineering, and the Marvos platform is where that engineering shows most clearly. 

The SS904L mesh in the MS and MS-D coils uses a military-grade stainless steel alloy that distributes heat more evenly than standard Kanthal mesh, and the tea fibre cotton wicking (a blend of tea leaf fibre and organic cotton) absorbs e-liquid faster while resisting degradation at higher temperatures. 

The CRC pod brings the FM COILTECH platform into a pod format that still performs like a dedicated sub-ohm tank. That crossover between pod convenience and tank performance is what Freemax has been refining across the Marvos series.

Stock Up and Save

One pod per pack. If you vape daily at 60W or higher, the PCTG housing will last through several coil changes before the O-rings soften or the fill port loses its seal. 

Grabbing a spare pod alongside your next coil order means you are never stuck waiting for a replacement if the housing wears out. Pair it with some 70/30 Shortfills and the whole setup is sorted. 

Every order from Pirate Vapes ships same day before 4 pm, age-verified checkout, TPD compliant stock, over 18s only. Spend over £40 and delivery is free with Free Pirate Post.

Conclusion

The Marvos CRC pod does exactly what a replacement pod should do. Child-resistant cap, durable PCTG housing, four-magnet base, press-fit coil compatibility across the entire MS and MS-D range, and a proper 810 mouthpiece for DTL draws. 

It fits every Marvos device Freemax makes, and the swappable coil design keeps running costs lower than sealed-pod alternatives. If your current pod housing is cracked, clouded, or just worn from months of use, a fresh one restores the fit and seal. 

Pick one up alongside some Vape Accessories at Pirate Vapes.

FAQs

Does the Marvos CRC pod come with a coil?

No. The pod ships empty. You need to purchase a Freemax MS or MS-D mesh coil separately and press it into the base of the pod before filling.

Which Freemax devices does the Marvos CRC pod fit?

The Marvos X 100W, Marvos T 80W, Marvos S 80W, and Marvos 60W. It will not fit Freemax devices outside the Marvos family.

What e-liquid ratio works best with the Freemax Marvos CRC pods?

High VG blends. 70/30 VG/PG or higher is ideal for the sub-ohm MS and MS-D coils. Thinner 50/50 liquids can flood the mesh at these resistances and cause spitting.

How long does the Freemax Marvos CRC pod housing last?

Several weeks to a few months depending on usage. The PCTG body outlasts multiple coil changes. Replace the pod when the fill port seal loosens, the O-rings degrade, or the plastic clouds up and you can no longer read the liquid level.

Is the drip tip in the Freemax Marvos CRC replaceable?

Yes. The pod uses a standard 810 wide-bore drip tip that pulls out and can be swapped for any compatible 810 mouthpiece.

What does CRC stand for in Freemax Marvos CRC pods?

Child Resistant Cap. The pod's top-fill mechanism is certified to ISO 8317, requiring a lift-and-slide motion to open.