Innokin Plexus Replacement Pods

Innokin Plexus Replacement Pods

Two pods per pack, 2ml each, with the mesh coil built in. These are the refills for the Innokin Plexus range. They fit the Plexus Go and the Plexus Pro, in three resistances so you can match the pod to the device. The 0.6ohm suits the Pro's higher output.

The 0.8ohm and 1.2ohm cover the Go. Each fills from the top through a sliding port. When flavour fades, you drop in a fresh pod rather than rebuilding a coil. See the rest of the Replacement Pods for other devices.

Why vapers choose this:

• Three resistances in one range let you set the draw across the Plexus Go and Plexus Pro, from an RDL-leaning 0.6ohm down to a tight MTL 1.2ohm.

• 2ml integrated-mesh pod keeps the coil and cartridge as a single part, so a fresh pod restores clean flavour in one swap.

• Top slide-fill refills the pod without removing the coil, which keeps the process quick and tidy.

• Two pods per pack give you a spare in reserve, so a tired pod never leaves the device out of action.

• Nic salt or freebase ready means the mesh coils handle either liquid type, so you are not tied to one style.

Innokin Plexus Pods Features

2ml Integrated Mesh Pod

Each Plexus pod holds 2ml, the UK maximum, with the mesh coil built into the cartridge. Mesh spreads the heat evenly across the wick, which is the reason these pods hold flavour consistently through a tank. When performance drops, the whole pod is replaced in seconds.

Three Resistance Options

The range covers 0.6ohm, 0.8ohm and 1.2ohm, so one product line serves both Plexus devices. The lower resistances lean toward a warmer, airier draw, while the 1.2ohm gives a tighter mouth-to-lung inhale. Match the pod to your device and the liquid you run, drawn from the Nic Salts Range.

Top Slide-Fill Refilling

Refilling is done from the top. Slide the port open, add your liquid, and close it, with the coil left in place. The top-fill design keeps refills clean and means you are not pulling the pod apart every time it runs low.

Nic Salt and Freebase Compatibility

The Plexus mesh pods work with both nicotine salt and freebase e-liquid. Higher-strength nic salts pair well with the tighter 1.2ohm pod, while the lower resistances suit freebase juice at a slightly airier draw. That flexibility lets the same device cover different vaping habits.

Innokin Plexus Pod Resistance Options

The Innokin Plexus pods come in three resistances, each matched to a device and draw style. The pods carry an integrated mesh coil and are sold in packs of two.

#buttons

• 0.6ohm Plexus Pod
• 0.8ohm Plexus Pod
• 1.2ohm Plexus Pod

How to Swap Your Innokin Plexus Pod

Fitting a fresh pod takes under a minute.

1. Lift the old pod out of the device to release it from the connection.

2. Slide open the top-fill port on the new pod and add your e-liquid up to the 2ml line, then close it.

3. Stand the filled pod upright for a few minutes so the mesh coil soaks and avoids a dry first puff.

4. Push the pod into the device until it seats, then take a few gentle draws before vaping normally.

What's in the Innokin Plexus Pods Pack

Each pack gives you two cartridges to rotate.

• 2x Innokin Plexus replacement pods (2ml, integrated mesh, in your chosen resistance)

E-liquid and the Plexus device are not included and are bought separately.

Compatible with the Plexus Go and Plexus Pro

These Innokin Plexus pods are made for the Plexus Go and Plexus Pro pod kits. The 0.6ohm pod is suited to the Plexus Pro and its higher wattage, while the 0.8ohm and 1.2ohm pods are matched to the Plexus Go, so choose the resistance that fits your device.

They are not interchangeable with pods from other Innokin systems such as the Sceptre, Endura or Sensis, even where the names sound similar, so confirm you own a Plexus kit before ordering. For the matching devices and wider hardware, see the Innokin Collection.

About Innokin

Innokin has built its name on mouth-to-lung and refillable hardware, and the Plexus platform is one of its more approachable pod lines.

Rather than a separate coil, the Plexus system seals a mesh coil inside a transparent 2ml pod, which keeps maintenance to a single swap and the juice level in view.

Offering the pods across three resistances is how Innokin lets one platform serve both the tighter MTL vaper and someone after a looser restricted draw.

It is a practical, low-maintenance approach in keeping with the brand's focus on everyday refillable kits, and Pirate Vapes lists the full resistance range so you can match a pod to your Plexus device.

Stock Up and Save

Pods are a consumable, so keeping a pack in reserve means your Plexus device is never sidelined by a worn cartridge. Pirate Vapes stocks the Innokin Plexus pods through an age-verified checkout, with Free Pirate Post on orders over £40.

Regular refills like these are a natural fit for The Crow's Nest subscription, and bundle pricing is worth a look in the Multi-Buy Range.

Conclusion

The Innokin Plexus replacement pods keep a Plexus Go or Plexus Pro running, with a 2ml integrated-mesh cartridge, a top slide-fill and a choice of 0.6ohm, 0.8ohm or 1.2ohm to set the draw.

Pick the resistance that matches your device, keep a spare pack handy, and you are back to clean flavour in one swap. Find more spares in the Vape Accessories, pair them with a suitable juice from the Refillable Pod Kits range, and shop the full lineup at Pirate Vapes.

FAQs

What resistances do the Innokin Plexus pods come in?

The Plexus pods are available in 0.6ohm, 0.8ohm and 1.2ohm, each with an integrated mesh coil. The 0.6ohm suits the Plexus Pro, while the 0.8ohm and 1.2ohm are matched to the Plexus Go.

Which devices do the Innokin Plexus replacement pods fit?

The pods fit the Innokin Plexus Go and Plexus Pro pod kits. Choose the resistance that matches your device, since the higher-power 0.6ohm is intended for the Pro.

How many pods are in a pack of Innokin Plexus pods?

Each pack contains two 2ml pods in your chosen resistance. Two per pack gives you a spare to rotate as the first one wears out.

Can I use nic salt in the Innokin Plexus pods?

The Plexus mesh pods work with both nic salt and freebase e-liquid. Higher-strength nic salts pair well with the 1.2ohm pod for a tighter MTL draw.

How do I refill the Innokin Plexus pod?

Slide open the top-fill port, add your e-liquid up to the 2ml mark, and close it. The coil stays in the pod, so there is nothing to remove during a refill.

How long do the Innokin Plexus pods last?

A pod typically lasts a week or two of regular use before the flavour dulls or vapour drops off. Because the mesh coil is built in, a fresh pod brings back clean flavour without a separate coil change.