Innokin Foretex Replacement Pods

A 2ml refillable mesh pod built for the Innokin Foretex pod kit, and nothing else. Two resistance options sit inside: a 0.6ohm mesh coil for a looser, warmer RDL draw and a 0.8ohm mesh coil for a tighter MTL pull.

Both use an integrated coil, so there's no separate coil to fiddle with. Side-fill design means you top up without pulling the pod apart. If your Foretex has started tasting flat, this is the part that needs replacing, not the device itself.

Why vapers choose this:

• Mesh coil, not standard wire. Integrated mesh spreads heat more evenly than a traditional round-wire coil, which means fewer dry hits and a cleaner flavour through the pod's life.

• Two resistances, one pod design. You are not locked into a single draw style.

• Side-fill keeps things tidy. No need to remove the pod from the device just to top it up.

• Built specifically for the Foretex. No universal-fit compromises, no loose seal.

• Straightforward swap. When flavour drops off, the whole pod goes, coil and all.

Innokin Foretex Replacement Pods Features

Mesh Heating That Actually Spreads Evenly

Standard round-wire coils heat from a single point. The mesh element in these pods spreads that heat across a wider surface, so the e-liquid vaporises more consistently from the first draw to the last. Less scorched cotton, more even flavour.

Two Resistances for Two Different Draws

The 0.6ohm pod runs warmer, at roughly 20-25W, and gives a slightly looser draw suited to RDL vaping. The 0.8ohm pod sits at 14-17W and delivers a tighter, more traditional MTL pull. Worth trying both if you're not sure which suits your habit.

Side-Fill Without the Faff

The fill port sits on the side of the pod, away from the airflow channel. Flip the seal, add your e-liquid, close it. You don't need to remove the pod from the Foretex to refill it, which matters if you're topping up on the move.

A Pod, Not Just a Coil

Because the coil is sealed inside the pod housing rather than sold separately, there is nothing to unscrew or misalign. When performance drops, the entire unit gets replaced. Simple, if slightly less economical than a swappable-coil system.

Built for the Foretex, Nothing Else

These pods are shaped and sealed specifically for the Innokin Foretex. They will not fit other Innokin pod kits, and other manufacturers' pods will not fit the Foretex. Worth checking your device name before ordering.

Innokin Foretex Replacement Pods Resistance Options

Two mesh resistances are available for the Foretex, and the right one depends on how you like to vape. 

#buttons

• 0.6ohm
• 0.8ohm

How to Set Up the Innokin Foretex Replacement Pods

Quick swap. A couple of minutes from start to finish.

1. Remove the empty pod from the Foretex, pulling it straight out from the top.

2. Open the side-fill port on the new pod and add e-liquid until it reaches just below the fill line.

3. Close the fill port firmly. Check the seal sits flush before you carry on.

4. Insert the pod back into the device until it clicks into place.

5. Leave it to sit for six to seven minutes before your first draw, giving the mesh cotton time to fully saturate.

6. Start on a gentle draw at low wattage, then settle into your usual setting once you've confirmed the flavour is coming through clean.

What's in the Innokin Foretex Replacement Pods Box

A multi-pack of pods in your chosen resistance. No device, no e-liquid, no charging cable. Just the replacement pods themselves, ready to fill.

Made Exclusively for the Innokin Foretex Pod Kit

These pods are compatible with one device: the Innokin Foretex. The Foretex is a compact aluminium-bodied pod system, and its top-side pod slot is shaped specifically to seat this pod design.

They will not fit other Innokin devices such as the CoolFire P60 or older Innokin pod kits, and they are not interchangeable with pods from other brands. If your device is not the Foretex, check our wider Refill Pods range for the correct match before ordering.

About Innokin

Innokin has been building vaping hardware since the earliest days of the UK market and remains one of the more established Chinese manufacturers supplying British retailers. The Foretex line reflects a shift many hardware brands have made in recent years: away from disposable-style Big-Puff Kits and back toward refillable pod systems built to last.

The pod line for the Foretex keeps things simple, with mesh coils and a side-fill design rather than the swappable-coil systems Innokin uses elsewhere in its range.

Stock Up and Save

Pods don't last forever, and running out mid-week with a dead flavour is the most common reason vapers switch devices unnecessarily. Keeping a spare pack on hand means you're never caught short.

Every order from Pirate Vapes ships same-day before 4pm, and all pods are sold through an age-verified checkout, TPD compliant, over 18s only. Orders over £25 qualify for Free Pirate Post.

Conclusion

If you're running an Innokin Foretex and the flavour has started to fade, these mesh Replacement Pods are the fix. Two resistance options cover both a looser RDL draw and a tighter MTL pull, and the side-fill design keeps refills quick. Just make sure your device is the Foretex specifically, since these pods don't cross over to other Innokin kits.

Browse the wider Innokin Range or check out our MTL Vape Kits if you're considering an upgrade. For everything else pod-related, Pirate Vapes has you covered.

FAQs

Which device do these pods fit?

Only the Innokin Foretex pod kit. They are not compatible with other Innokin devices.

What's the difference between the 0.6ohm and 0.8ohm pods?

The 0.6ohm runs warmer at 20-25W for a looser draw. The 0.8ohm is tighter, at 14-17W, and suits nic salts.

How do I fill the pod?

Open the side-fill port, add e-liquid to just below the line, and close it firmly. No need to remove the pod fully.

Can I use nic salts with these pods?

Yes, particularly with the 0.8ohm option, which is built for a tighter MTL draw that suits higher-strength salts.

How long does a pod usually last?

Typically five to ten days with regular daily use, depending on how often you vape and your chosen e-liquid.

Do I need to prime the pod before use?

Yes. Fill it, then let it sit for six to seven minutes before your first draw so the mesh cotton saturates properly.