Innokin Arcfire Replacement Pods

Innokin Arcfire Replacement Pods

Two resistances, one refillable pod, and a mesh coil built to go the distance. The Innokin Arcfire replacement pods carry a built-in Arc-Coil mesh in either 0.8ohm for a looser, warmer draw or 1.2ohm for a tighter MTL pull.

Each is a 2ml refillable cartridge, sold in a pack of 2, that fills from a side port and clicks on with a magnet. When the flavour fades, you drop in a fresh pod rather than changing a coil. They fit the Innokin Arcfire pod kit. Pirate Vapes stocks both resistances among its Replacement Pods and Refillable Pod Kits range.

Why vapers choose these pods:

• Two pod options give you MTL and RDL vaping, with 1.2Ω for a tighter draw and 0.8Ω for a warmer, looser draw.

• A built-in Arc-Coil mesh that Innokin designed for longer life.

• No coil changes, just a fresh pod when the flavour fades.

• A side stopper and clear body for clean, easy refills.

• A pack of 2 to keep a spare on hand.

Innokin Arcfire Replacement Pods Features

1.2Ω and 0.8Ω Pod Options

The range gives you a choice of feel. The 1.2ohm pod runs best around 10W for a tight, cooler MTL draw with a firm throat hit and longer coil life. The 0.8ohm pod runs best around 14.5W for a warmer, airier restricted lung draw with more vapour. Same pod shape, two experiences.

Built-In Arc-Coil Mesh

Each pod uses Innokin's Arc-Coil mesh, a heating design the brand built for even heat and a longer working life than a standard coil. Because it is sealed into the pod, you never handle the coil itself. When the flavour tails off, you swap the pod, not a fiddly little part.

MTL and RDL Vaping

Your call, set by resistance. The higher 1.2ohm gives the tight, cigarette-style draw a lot of mouth-to-lung vapers want, and it pairs neatly with Nic Salts at 10mg or 20mg. The lower 0.8ohm opens the draw up and suits a 50/50 E-Liquid blend for more vapour.

Easy Side-Fill Design

Refilling is a quick job. Lift the silicone stopper on the side, sit your bottle in the port, and fill to the line. The pod body is see-through, so you always know how much liquid is left before you head out. No removing the pod mid-session to check.

Fixed MTL Airflow

The airflow is built into the pod rather than adjustable, which sounds like a limitation but is quietly handy: the draw feels the same every time, with nothing to knock out of place in a pocket. It is set for MTL, so it delivers a steady, tight pull pod after pod.

Innokin Arcfire Replacement Pods Resistance Options

Two options in the range, and the pick comes down to how you like to draw.

Start with the 1.2ohm if you want the tighter draw. It runs best around 10W, gives a firm, cooler mouth-to-lung pull with a stronger throat hit, and the higher resistance means the coil tends to last longer. It is the natural home for nic salts.

The 0.8ohm is the looser option. Running best around 14.5W, it gives a warmer, airier restricted lung draw with more vapour and a fuller flavour, and it suits 50/50 liquid well.

#buttons

• 0.8 Ohm
• 1.2 Ohm

How to Set Up the Arcfire Pods

Fill, settle, then prime.

1. Pull the old pod off the magnetic base of your ArcFire battery.

2. Open the silicone stopper on the side of a fresh pod, fill to the 2ml line, and push the stopper firmly back in to seal it.

3. Click the pod onto the battery. (Try it in both orientations to feel the difference in the airflow restriction).

4. Stand the device upright and give the coil five to ten minutes to soak completely through before firing it. Firing a dry coil will instantly ruin it.

5. Draw steadily on the mouthpiece to vape and let the flavour settle over the first few puffs.

What's in the Innokin Arcfire Replacement Pods Box

Two Innokin Arcfire pods in your chosen resistance, either 0.8ohm or 1.2ohm, each with the mesh coil already built in. There is no device and no e-liquid included, so you will need your Arcfire and a bottle of nic salt or 50/50 to get going.

Pods Made for the Innokin Arcfire

These cartridges are shaped for the Innokin Arcfire Pod Kit and nothing else. The pod and its magnetic base are built for that device, so other Innokin pods will not fit and these will not work in other kits. If you are after the device or want to see the wider lineup, browse the Innokin Vape Range.

About Innokin

Innokin has spent well over a decade building approachable mouth-to-lung hardware, and the Arcfire is one of its more recent refillable pod systems. The pods are the heart of it, using the Arc-Coil mesh design the brand developed for even heating and a longer working life, so you spend less time swapping and more time vaping.

It is a straightforward, reliable setup aimed at vapers who want tidy MTL performance without the fuss of loose coils, and it slots neatly alongside the better MTL Vape Kits around.

Stock Up and Save

The Arc-Coil mesh is built to last, so a pack of 2 stretches further than you might expect, and keeping a spare pod in the drawer means you are never caught out when the flavour starts to dull. Grabbing both resistances also gives you a tight MTL draw and a looser one from the same device.

Pirate Vapes ships every order the same day when it is placed before 4 pm. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

If you run an Innokin Arcfire, these are the pods that keep it going. Two resistances give you a tight MTL draw or a looser, warmer one; the built-in Arc-Coil mesh means no coil changes, and a fresh pod brings the flavour straight back.

Pair them with a nic salt or a 50/50 bottle and a pack of 2 will see you through weeks. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

What device do Innokin Arcfire Replacement Pods fit?

Only the Innokin Arcfire Pod Kit. The pods and their magnetic base are shaped for that device alone.

What is the difference between Innokin Arcfire 0.8 and 1.2 pods?

The 1.2ohm gives a tighter MTL draw and lasts longer. The 0.8ohm gives a looser, warmer RDL draw with more vapour.

Do Innokin Arcfire Replacement Pods come with e-liquid?

No, they arrive empty. Fill through the side port with your own nic salt or 50/50 liquid.

Do I need to change the Innokin Arcfire Replacement Pod coil?

No. The mesh coil is built into the pod, so you replace the whole pod when the flavour fades rather than swapping a coil.

Can I use nic salts in Innokin Arcfire Replacement Pods?

Yes. The 1.2ohm is ideal for salts at 10mg or 20mg. The 0.8ohm suits 50/50 or slightly higher-VG liquid for more vapour.

How long do Innokin Arcfire Replacement Pods last?

Usually a week or two, depending on your liquid and how much you vape. The mesh is built to last, but sweeter blends will wear any coil faster.