Innokin Prism T20S Replacement Vape Tank

Innokin Prism T20S Replacement Vape Tank

Two coils in the box, and no mess when you change them. The Innokin Prism T20S Replacement Vape Tank is a 2ml top-fill MTL and DTL tank with a 510 thread and Innokin's no-spill coil swap system, so re-coiling does not leave liquid running down your wrist.

A 0.8ohm Prism-S coil comes fitted, with a 1.5ohm sitting spare. Stainless steel body, Pyrex glass, eleven colours to choose from. Whether you are replacing a worn tank or upgrading the one your kit shipped with, this is a proven MTL Tank that keeps things simple.

Why vapers choose this:

• Two coils, two draws. The fitted 0.8ohm gives a slightly looser, warmer MTL with a touch more vapour, while the spare 1.5ohm pulls tight and cigarette-close, so you can feel out your preference before buying spares.

• No-spill coil swap means you pull the old coil and press the new one in without unscrewing a wet base.

• Twist-off top cap. Unscrew, fill to 2ml, twist shut. No sliding ports to catch mid-pocket.

• 510 thread fits the majority of variable wattage mods, not just the Innokin kit.

• Stainless steel and Pyrex give it a durable, knock-tolerant build that outlasts cheaper plastic clearomisers.

Prism T20S Features

Easy No-Spill Coil Changes

The no-spill coil swap system is the reason this tank keeps its fans. Changing a coil usually means unscrewing a base full of liquid and mopping up afterwards. Here you drain nothing. Pull the spent Prism-S coil out, click the fresh one in, refill. Spares live in our Vape Coils range.

Two Coil Options Included

Because they give genuinely different vapes. The 0.8ohm at 16-18W is the looser, more forgiving option that suits lower-strength 50/50. The 1.5ohm at 13-14W tightens right up for a sharp, cigarette-style pull. You get both in the box, so you can test each without spending more.

Simple Twist-Off Top Fill

Filling is refreshingly boring, in the best way. The cap unscrews fully from the top; you fill through the opening to the 2ml line, then twist it back down. Clean separation, no half-open slots dripping on your fingers. It seals tight once closed, so it travels well in a pocket or bag.

Choose The Right Coil For Your Nicotine

Run 20mg nic salt with the 1.5ohm, and the tight draw feels familiar to anyone stepping off cigarettes. A 20mg Nic Salt in a 50/50 base is the natural pairing. Dropped your strength down already? The 0.8ohm with a lower-strength freebase is the easier, smoother option.

Strong Steel And Pyrex Build

The stainless steel body and reinforced Pyrex glass are not just for looks. Plenty of owners report tanks lasting years, with the glass well protected against the odd drop. It has real weight in the hand, feels solid, and shrugs off daily wear that would crack a budget clearomiser.

Prism T20S Colours

The Innokin Prism T20S is stocked in eleven finishes. Pick whatever suits your mod.

#buttons

• Black
• Blue
• Grey
• Pink
• Purple
• Rainbow
• Red
• Royal Purple
• Stainless Steel
• Teal
• Yellow

How to Set Up the Prism T20S

1. Unscrew the base and press-fit your chosen Prism-S coil.

2. Drip a few drops of e-liquid onto the exposed cotton so it is not bone dry.

3. Screw the tank onto your 510 mod.

4. Twist off the top cap and fill to the 2ml line, then close it.

5. Give the cotton around five minutes to drink up before you fire it.

6. Start at the low end, 16W for the 0.8ohm or 13W for the 1.5ohm, then adjust to taste.

What Is in the Box

You get:

• The Prism T20S tank with the 0.8ohm coil pre-installed,

• a spare 1.5ohm Prism-S coil,

• a narrow drip tip top cap,

• and a set of O-rings.

There is no e-liquid and no mod supplied, so you will need your own 50/50 or high-PG juice and a compatible device to run it.

Fits the Endura T20-S, EZ.WATT and More

The Prism T20S uses a 510 threaded connection, so it screws onto most variable wattage Vape Mods that output around 13-18W, not only Innokin hardware. The matching Prism-S 0.8ohm and 1.5ohm coils fit the Endura T20-S, EZ.WATT and Endura Apex, and a 0.9ohm mesh Prism-S is sold separately for sharper flavour. Cracked the glass? Replacements are in our Replacement Tank Glass section. Note that these coils do not fit the older T20 tank.

About Innokin

Innokin has been a fixture in UK mouth-to-lung vaping for years, largely thanks to the Endura line that introduced a lot of ex-smokers to refillable kits. The T20-S and its Prism-S coil system carry that reputation for straightforward, reliable hardware that just works.

No gimmicks, no steep learning curve, just a tank that fills easily and re-coils cleanly. For vapers who want dependable MTL without the fuss, Innokin remains one of the safer names to buy into.

Stock Up and Save

Coils wear out, so keeping spares in a drawer is the sensible move, and Pirate Vapes stocks the Prism-S range alongside the tank so you are never caught mid-week on a burnt coil. Order before 4 pm on a weekday for same-day dispatch.

Checkout is age-verified and strictly over 18s only, and every product we list is TPD compliant, so you always know exactly what you are buying.

Conclusion

The Prism T20S is a dependable, no-nonsense MTL tank that fills cleanly, re-coils without mess, and lasts. Two coils in the box, eleven colours and a 510 fit make it an easy pick for replacing or upgrading a tank.

Grab your spares from the Innokin Collection, round out your setup with Vape Accessories, and shop the full range at Pirate Vapes.

FAQs

What coils come with the T20S?

Two. A 0.8ohm Prism-S is pre-fitted and runs at 16-18W, and a 1.5ohm spare runs at 13-14W for a tighter draw.

Will the T20S fit my mod?

If your mod has a 510 connection and puts out roughly 13-18W, yes. It suits most variable wattage mods, not just Innokin kits.

Can I use mesh coils in the T20S?

Yes. A 0.9ohm mesh Prism-S coil is sold separately and drops straight in for sharper flavour.

What e-liquid should I use with the T20S?

A 50/50 or high-PG blend. High-VG liquids above 70% will not wick fast enough at this wattage and can cause dry hits.

Does the T20S leak when I change coils?

That is the point of the no-spill system. Pull the old coil, press the new one in, no flood. Filling is through the twist-off top cap.

How many colours are there in the T20S?

Eleven, from Black and Stainless Steel through to Rainbow, Teal and Pink, all the same price.