Innokin GOMax Vape Tank

No coil changes. No maintenance. Just fill it, vape it, and replace the whole tank when the coil is done. The Innokin GOMax is a 29mm disposable sub-ohm tank with a built-in Plex-3D Matrix mesh coil, 2ml capacity, sliding top fill, and adjustable bottom airflow. 

It threads onto any 510 mod, runs on High-VG Shortfills, and delivers DTL clouds and flavour without a single tool or spare part. When the coil burns out, you swap the tank. Available in five colours at Pirate Vapes with tracked, age-verified UK delivery.

Why do vapers choose this:

• No coil changes. The coil is built into the tank. When it starts tasting burnt, you do not unscrew anything, pull out wicking, or prime a new coil head. You take the old tank off, thread a new one on, fill it, and vape. The entire maintenance process takes thirty seconds and zero experience.

• Plex-3D Matrix mesh coil. Innokin’s mesh design heats e-liquid faster and more evenly than a standard wire coil. The grooved and notched mesh surface increases the contact area with the cotton, which improves wicking and produces denser clouds with sharper flavour. It is the same coil technology Innokin uses in its Zenith and GoMax Tube lines.

• Adjustable airflow. The dual slotted airflow ring at the base of the tank lets you control the draw from a moderately restricted DTL inhale to a wide-open lung hit. You get to set the airflow where you want it and leave it.

• PCTG plastic construction. Lighter and more impact-resistant than glass. If you drop it, it does not shatter. PCTG is also recyclable, which makes it a better choice than a tank you throw in the bin with a glass section attached.

• Price. At the cost of a coffee, the GOMax gives you a full sub-ohm DTL tank with a mesh coil, adjustable airflow, and top fill. For vapers who want to try sub-ohm vaping without committing to a multi-coil tank setup, or for anyone who just wants a simple, affordable tank that works, it is hard to argue with.

Available Colours

#buttons

• Black
• Green
• Blue
• Pink
• Clear

Innokin GOMax Vape Tank Features

Sliding Top Fill

Slide the top cap to one side to reveal the fill port. A silicone seal sits beneath the cap to prevent leaks when the tank is closed. The mechanism is simple, quick, and works well with standard shortfill nozzles. You can refill the tank without removing it from your mod.

Plex-3D Matrix Mesh Coil

The mesh coil sits inside the tank and cannot be removed or replaced. It is designed for sub-ohm DTL vaping at higher wattages. The Plex-3D mesh pattern uses grooves and notches across the mesh surface to increase the area in contact with the organic cotton wick. This means faster heating, more consistent vapour production, and better flavour extraction from high-VG shortfills. When the coil reaches the end of its life, you replace the entire tank.

Adjustable Airflow

The dual slotted airflow control ring is integrated into the base of the tank. Rotate it to open or close the airflow. Fully open gives a loose, airy DTL draw with maximum vapour. Close it down for a more restricted inhale with a warmer, denser hit. The ring holds its position once set and does not slide during use.

PCTG Plastic Construction

The tank body is made from PCTG, a food-grade plastic used across the vaping industry for its clarity, impact resistance, and chemical stability. It will not crack if you drop it, and it is lighter than a glass-and-steel tank. PCTG is also compatible with most e-liquid types, though heavily acidic or citrus-heavy flavours may cause clouding over extended use.

What E-Liquid to Use

High VG. 70/30 VG/PG or thicker. The GOMax is a sub-ohm DTL tank running a low-resistance mesh coil, and it is built for thick shortfill e-liquids. Fruits, desserts, menthols, bakery flavours: whatever you like, keep the VG at 70% or above. Do not put nic salts or thin 50/50 Liquids through this tank.

The low coil resistance and open airflow will deliver too much nicotine too fast with nic salts. Stick to 6mg nicotine or lower for sub-ohm vaping. Browse our e-liquid range at Pirate Vapes for shortfills that pair well with sub-ohm tanks.

How to Set Up the Innokin GOMax

1. Thread the GOMax tank onto your mod's 510 connection until it is finger-tight (no coil installation needed).

2. Slide the top cap over to open the port, fill the 2ml reservoir with high-VG shortfill, and slide it back to seal.

3. Let the tank sit completely undisturbed so the built-in Plex-3D Matrix mesh coil can fully saturate.

4. Set your mod between 60–80W (start at 50W for the first few puffs to gently break in the fresh wick).

5. Twist the integrated bottom airflow ring to your preferred draw width, press fire, and vape.

What’s in the Box

• 1 x Innokin GOMax Disposable Tank (coil pre-installed)

• 1 x User Manual

Compatibility

The Innokin GOMax uses a standard 510 threaded connection. It fits any mod with a 510 connector that can fire at the wattage the 0.19Ω mesh coil needs. The GOMax was originally designed for the Innokin GoMax Tube Kit, but it works with any compatible 510 mod.

The coil is not replaceable. When it burns out, you replace the whole tank. There are no replacement coils to buy for this product. Pirate Vapes stocks the GOMax tank in our Innokin Range.

About Innokin

Innokin has been making vape hardware since 2011 and has a strong reputation in the UK for beginner-friendly, well-built products. The Endura and Zenith lines are staples in vape shops across the country. The GOMax sits in a different part of the range: it is a disposable sub-ohm tank designed for simplicity and affordability.

No Replacement Coils to track down, no maintenance schedule, no learning curve. Fill it, vape it, replace it. It is one of the most straightforward ways to get into sub-ohm DTL vaping without spending a lot or dealing with complicated hardware.

Stock Up and Save

At the price of the GOMax, it makes sense to pick up two or three at once. When the coil in your current tank starts fading, you have a fresh one ready to go. Add a shortfill and your order is sorted.

Free Pirate Post on orders over £25. Same-day dispatch before 4pm. Crew Rewards points on every order. Everything ships in plain packaging, tracked and age-verified.

Conclusion

29mm disposable sub-ohm tank with a built-in Plex-3D Matrix mesh coil. 2ml capacity. PCTG plastic construction. Sliding top fill with silicone seal. Adjustable dual slotted bottom airflow. 510 connection.

DTL vaping on high-VG shortfills. No coil changes, no maintenance. Replace the tank when the coil is done. Available in five colours at Pirate Vapes with tracked, age-verified UK delivery.

FAQs

Is this a disposable tank?

Yes. The coil is built in and cannot be replaced. When the coil burns out, you replace the entire tank.

What is the e-liquid capacity?

2ml.

Can I replace the coil?

No. The Plex-3D mesh coil is fixed inside the tank. This is a disposable tank. When the coil is spent, you swap the whole tank for a new one.

Will it fit my mod?

If your mod has a 510 connection and can fire at the wattage the 0.19Ω coil needs, it will work. The 510 thread is the standard connection for sub-ohm tanks.

What e-liquid should I use?

High-VG shortfills. 70/30 VG/PG or thicker. Do not use nic salts or thin 50/50 liquids. For sub-ohm vaping, 6mg nicotine or lower is recommended.

How do I fill the tank?

Slide the top cap to reveal the fill port. Fill with your chosen shortfill. Slide the cap back to seal.

What colours are available?

Black, Green, Blue, Pink, and Clear.

How long does the coil last?

Coil life depends on how often you vape, the sweetness of your e-liquid, and your wattage. Expect roughly the same lifespan as a standard sub-ohm coil head.

Is this compatible with the Innokin GoMax Tube Kit?

Yes. The GOMax tank was designed for the Innokin GoMax Tube Kit, but it also works with any 510-compatible mod.

Does Pirate Vapes stock this tank?

Yes. The Innokin GOMax is in our Innokin range at Pirate Vapes.