Innokin T18E Pro Tank 

Pirate Vapes stocks the Innokin T18E Pro Top Fill Replacement Tank for anyone running an Endura T22 Pro kit and needing a fresh tank. Cracked glass, worn seals, or just fancying a second colour. The T18E Pro holds 2ml, fills from a sliding top cap, and uses 510 threading that pairs it with most low-wattage mods on the market.

A 1.7Ω coil sits pre-installed inside, with a spare coil in the box. Stainless steel frame, Pyrex glass, fixed MTL airflow. Pirate Vapes ships every age-verified order across the UK.

Why vapers choose this:

• Sliding top-fill that opens and shuts without unscrewing anything.

• Stainless steel armour wrapped around the glass for drop protection.

• No-spill coil swap system, so changing a coil does not mean draining the tank.

• Fixed airflow tuned specifically for a tight, cigarette-style MTL draw.

• 510 connection fits the Endura T22 Pro and most other compatible mods.

Innokin T18E Pro Tank Features

Sliding Top-Fill

Slide the cap in the direction of the arrow, pour, slide it shut. No unscrewing, no loose parts sitting on the kitchen counter. The fill port is wide enough for most bottle nozzles, and the seal sits tight when it closes. Refills take about ten seconds, and nothing spills if you keep the tank upright.

Stainless Steel Armour

A steel sleeve wraps around the outside of the Pyrex glass, leaving clear viewing windows on each side. You can still see juice levels at a glance. The sleeve adds real protection against drops and knocks, which matters when you carry this tank in a pocket or bag every day. Pirate Vapes keeps multiple colours in stock across the Vape Tank range.

No-Spill Coil Swap

Innokin's no-spill coil system lets you pull the old coil out and push a new one in without emptying the tank first. Line up the flat sections on the base, push it in, and it locks. No threading, no leaking. The spent coil slides out cleanly. Pick up replacement Vape Coils for the T18E Pro from the same order.

Fixed MTL Airflow

No adjustable ring on this one. Innokin sets the airflow for a tight, cigarette-style draw, and it stays that way. That makes it predictable. Every hit feels the same, every time. If you want something that mimics smoking without guessing at airflow settings, the T18E Pro does not over complicate things.

510 Connection

Standard 510 threading means this tank screws onto the Endura T22 Pro and onto most other 510-compatible mods and batteries. If you already own a CoolFire, an MVP, or any other Innokin mod, it will likely fit. Worth checking the diameter of your device before ordering, though. Pair it with a 50/50 or Nic Salt E-Liquid for the best results.

Innokin T18E Pro Tank Colour Options

The T18E Pro Top Fill Replacement Tank comes in three colourways. Pick whichever matches your Endura T22 Pro kit, or go with something different.

#buttons

• Matte Black
• Brushed Silver
• Grey Steel
  

How to Set Up the Innokin T18E Pro Top Fill Replacement Tank

1. Unscrew the base of the tank and pull out the pre-installed coil if you want to prime it first. Drip 2 to 3 drops of e-liquid directly into the cotton visible on the coil.

2. Push the coil back in, lining up the flat edges with the alignment tracks inside the base, and tighten the base back onto the tank.

3. Slide the top cap open in the direction of the arrow. Fill the tank with your chosen e-liquid, avoiding the centre airflow tube.

4. Slide the cap shut and let the tank stand upright for 5 to 10 minutes. Do not skip the soak. Vaping a dry coil burns the cotton and ruins the coil in one hit.

5. Screw the tank onto your Endura T22 Pro or any 510-compatible device, and inhale.

What's in the Innokin T18E Pro Tank Box

• 1 x Innokin T18E Pro Replacement Tank (2ml)

• 1 x 1.7Ω Prism T18E Pro Coil (pre-installed)

• 1 x 1.7Ω Prism T18E Pro Coil (spare)

• 1 x Spare O-Ring Set

Built for the Innokin Endura T22 Pro

The T18E Pro tank is a direct replacement for the tank that comes with the Innokin Endura T22 Pro Kit. Same threading, same alignment, same fit. It also works with the Endura T18E Pro battery and any mod or device that runs a 510 connection.

The coils inside are Innokin Prism T18E coils, available in 1.5Ω, 1.7Ω, and 2.0Ω. Other Innokin tanks use different coil systems, so do not mix T18E coils with Z coils or iSub coils.

About Innokin

Innokin has been building vape hardware since 2011. The Endura series is what put them on the map with newer vapers. The T18 was one of the first kits people recommended to ex-smokers looking for a tight, quiet MTL draw.

The T22 Pro is the current version of that same idea: simple, reliable, built for high-PG liquids and nic salts. Innokin manufactures in Shenzhen and distributes globally. Their products consistently pass TPD and MHRA checks for UK sale. Not flashy. Just dependable hardware that works the way it should.

Stock Up and Save

Tanks crack. Seals wear out. Having a spare means you do not go a week without your setup while a replacement ships. Pirate Vapes packs every tank carefully with protective packaging, dispatched same day on orders placed before 4 pm.

All purchases go through age-verified checkout 18+ delivery only, and every product on Pirate Vapes is TPD-compliant and MHRA-notified. Grab a spare tank alongside your next coil restock and keep your T22 Pro running without downtime.

Conclusion

The Innokin T18E Pro Top Fill Replacement Tank is a simple, solidly built MTL Tank with a sliding fill system and fixed airflow. It fits the Endura T22 Pro and any 510 mod, comes with two coils in the box, and handles nic salts and 50/50 E-Liquids without fuss.

If your current tank has seen better days or you want a backup in a different colour, this is the part you need. Available now at Pirate Vapes with tracked UK delivery.

FAQs

Will this tank fit a standard T18 or T22 kit?

It is designed for the T22 Pro specifically. The threading is 510, so it may physically connect to older Endura models, but coil compatibility and tank alignment differ. Check your device name before ordering.

What coils does this tank use?

The tank ships with two of the updated 1.7Ω Pro coils, but it is fully backwards compatible if you prefer to buy and run the older 1.5Ω Prism T18E coils separately. 

Can I use high-VG e-liquids in this tank?

Stick to 50/50 VG/PG or higher-PG blends. High-VG liquids (70% or above) are too thick for the small coil wicking ports and will cause dry hits.

How often should I change the coil?

Roughly every one to three weeks, depending on usage and how sweet your juice is. When the flavour goes flat or tastes burnt, it is time for a fresh one.

Is this the same as the T18E tank (non-Pro)?

Similar design but different top-fill mechanism. The Pro version has a sliding top-fill instead of a screw-off cap. Both use T18E coils.

Does the tank come with e-liquid?

No. The box contains the tank, two coils, and spare O-rings. You supply the juice.