Innokin Zlide Top Vape Tank

Innokin Zlide Top Vape Tank

Top airflow was the upgrade the original Zlide always needed. The Innokin Zlide Top is a 2ml refillable tank that handles both MTL and RDL, built around a 24mm stainless steel body, a sliding top-fill cap, and a redesigned top airflow control ring that pulls air in from above to keep liquid off your pocket.

It runs the entire Innokin Z-Coil (Zenith) range, ships with two coils ready to go, and threads onto any 510 mod. If leak-prone bottom-airflow tanks have worn you down, this sits among the better MTL Tanks going, and the wider Vape Tanks range is worth a browse too.

Why vapers choose this:

• Top airflow, not bottom. Air enters from the top of the tank, so even left loose in a bag or pocket, liquid has nowhere to seep out. This is the single biggest reason people move up from the original Zlide, and it is not even close.

• One tank, two styles. Tight MTL with the 0.6ohm, looser RDL with the 0.3ohm.

• Runs the whole Z-Coil range, so you are never locked to a single resistance or forced onto a proprietary head.

• Sliding top-fill. Slide, fill, slide back.

• 510 threaded, which means it drops onto almost any regulated mod you already own rather than tying you to one brand of hardware.

Innokin Zlide Top Features

Top Airflow Solved the Leaking

The airflow now sits at the top of the tank rather than underneath. That single change reroutes air away from the base, and it is the fix that stops liquid escaping through the vents when the tank is tipped or jostled. Owners of the older bottom-airflow Zlide will notice the difference straight away.

From Tight MTL to Loose RDL

The single slotted airflow ring has real range. Narrow it right down, and you get a cigarette-style MTL pull on the 0.6ohm. Open it wider on the 0.3ohm, and it loosens into a warm restricted lung draw. If RDL is your thing, it holds its own against dedicated DTL Tanks at this size.

Why Two Coils in the Box?

Because most people want to try both draw styles before committing. You get the 0.6ohm DuoPrime pre-installed and a spare 0.3ohm to swap in. Both are press-fit, so changing them is a straight pull-out, push-in job with no threading and no tools.

Slide, Fill, Slide Back

Pull the mouthpiece, slide the top cap across, drip your juice into the single port, then slide it shut. No unscrewing the base, no juice on your fingers. Honestly, once you have refilled a top-fill tank this clean, going back to bottom-fill feels like a chore.

Steel and Glass, Built for Daily Carry

The chassis is stainless steel with a reinforced glass tube, so it shrugs off the knocks and short drops that come with everyday use. Crack the glass eventually, and it is a cheap, quick replacement rather than a whole new tank.

Innokin Zlide Top Colours

Four finishes are stocked, each on the same 24mm frame, so the choice is purely about the look on your mod.

#buttons

• Black
• Blue
• Silver
• Steel

How to Set Up the Innokin Zlide Top

Quick job. A couple of minutes start to finish.

1. Slide the top cap open, tip out any old liquid, then pull the used coil straight out of the base.

2. Take a fresh Z-Coil and drip three to four drops of e-liquid onto the exposed cotton around the coil so it is not bone-dry on the first fire.

3. Push the new coil firmly into the base until it seats with a click.

4. Reattach the base, slide the top open, and fill with your 50/50 or higher-PG Nic Salts to just below the line, then slide the cap shut.

5. Stand the filled tank upright and leave it alone for a solid seven minutes so the wick draws liquid all the way through. Fire a dry coil, and you will taste burnt cotton for the rest of its short life.

6. Fit it to your mod, start at a low wattage, and nudge the power up until the flavour and vapour feel right.

What's in the Innokin Zlide Top Box

Each tank comes with:

• the Zlide Top itself,

• a pre-installed 0.6ohm Z-Coil,

• a spare 0.3ohm Z-Coil,

• a replacement 2ml glass tube,

• a spare RDL drip tip,

• a spare O-ring set,

• and a user manual.

There is no e-liquid and no mod in the box, so you will need a 510 device and a bottle of juice to get going. Pirate Vapes keeps the full Z-Coil range and spare glass in stock separately when you need fresh parts.

Fits Every Innokin Z-Coil, and Almost Any 510 Mod

The Zlide Top runs on Innokin's Z-Coil (Zenith) series, the same heads shared across the Zenith, Zenith Pro, and GO Z tanks. That covers the 0.6ohm DuoPrime for a warm MTL draw, the 0.3ohm for restricted direct lung, and the higher-resistance Zenith options for a tighter pull. Any head marked Z or Zenith should press straight in.

On the mod side, the 510 connection means it pairs with the CoolFire Z60 it was designed around and most other regulated devices. See the full Innokin Vapes range for matching mods. What does not fit: pod-specific coils from other brands, and anything built on a non-Z proprietary fitment.

About Innokin

Innokin has spent years building its name on approachable MTL hardware, and the Zenith and Zlide tanks are the core of that reputation. The Z-Coil platform was designed to be swapped without tools and shared across a whole family of tanks, which keeps replacement costs low and coil supply simple.

The Zlide Top is the leak-focused evolution of that line, lifting the airflow to the top while keeping the same press-fit ease. If you ever crack the tube, Replacement Tank Glass is inexpensive and fits in seconds.

Stock Up and Save

A refillable setup like this pays for itself quickly. Once you own the tank, you are only buying coils and juice, which works out far cheaper over a month than grabbing a fresh device every week. Pirate Vapes keeps Z-Coils, spare glass and nic salts in stock so you are never caught short mid-week.

Orders placed before 4 pm ship the same day, and spend over £40 for Free Pirate Post. Every product is TPD compliant and sold to over-18s only through an age-verified checkout.

Conclusion

The Zlide Top takes a tank people already rated and fixes its one real weakness. Top airflow ends the pocket leaks, the Z-Coil range gives you MTL or RDL from the same tank, and the sliding top-fill keeps refills clean and fast.

For a durable, no-fuss refillable that works with hardware you likely already own, it is an easy pick. Pair it with fresh coils and Vape Accessories, and grab yours from Pirate Vapes.

FAQs

What capacity is the Zlide Top?

2ml, in line with UK rules. Other regions get a larger version with a bigger spare glass, but UK tanks are capped at 2ml.

Does the Zlide Top leak?

Rarely now. The top airflow design keeps liquid away from the vents, which was the whole reason for the redesign over the original bottom-airflow Zlide.

Which coils fit the Zlide Top?

Any Innokin Z-Coil or Zenith head. The 0.6ohm suits MTL and the 0.3ohm suits restricted direct lung.

Can I use the Zlide Top for both MTL and RDL?

Yes. Run the 0.6ohm with a narrow airflow setting for a tight mouth-to-lung draw, or fit the 0.3ohm with more air for a restricted lung vape. One tank covers both styles.

What mods does the Zlide Top work with?

It has a 510 connection, so it pairs with the CoolFire Z60 and just about any regulated 510 mod. Not for pod systems.

How often do I change the Zlide Top coil?

Depends on how much you vape and how sweet your juice is. Most people get one to two weeks from a Z-Coil. Swap it when the flavour dulls, or you taste burning.