Smoant Pasito Replacement Coils

Smoant Pasito Replacement Coils

Three ways to run one device. The Smoant Pasito Replacement Coils cover the full range built for the Pasito pod kit: a 0.6ohm Mesh DTL coil for flavour-forward direct lung vaping, a 1.4ohm Ni80 MTL coil for a tighter, cigarette-style pull, and a 0.5-1.0ohm RBA deck for anyone who wants to build their own.

That last option is what set the Pasito apart when it launched: a rebuildable atomiser squeezed into a pod format most vapers had only seen as sealed, disposable cartridges. Whichever style suits you, each coil drops straight into the same Pasito cartridge.

Why vapers choose this:

• Two vaping styles from one pod. Swap between the Mesh DTL and Ni80 MTL coil depending on whether you want clouds or a tighter throat hit.

• A genuine RBA option in a pod format. Most pod systems lock you into pre-built coils. The Pasito deck lets you build your own.

• Organic cotton wicking throughout. Cleaner flavour from the first fill, less of that plasticky taste some cheaper coils carry.

• Straightforward swap-in fit. Every coil drops into the same cartridge, so there is no separate pod to buy for each resistance.

• A pack of three keeps you covered. MTL and DTL coils come three to a pack, useful given how often a daily-use coil needs replacing.

• Fast, compliant dispatch. Pirate Vapes ships every order same-day, with the full TPD-Compliant Vapes range meeting current UK regulations.

Smoant Pasito Coils Features

Mesh Coil Built for Flavour, Not Just Clouds

The 0.6 ohm mesh coil uses a flat mesh heating element rather than traditional wire, spreading heat evenly across a wider surface. That translates into fuller, more consistent flavour at 20-25W, and the DTL draw suits shortfills and lower-strength freebase liquid well. If your Pasito has only run MTL coils so far, this is worth trying for a completely different side of the device.

Ni80 for a Tighter, Familiar Pull

The 1.4ohm Ni80 coil runs cooler and tighter, sitting comfortably at 10-13W. It suits nic salts particularly well, and the restricted draw feels closer to a cigarette than the airier Mesh option. Fair enough if you switch depending on mood: plenty of Pasito owners keep both types on hand and swap between them.

The RBA Deck Is Where the Pasito Gets Interesting

A rebuildable atomiser inside a pod system is not something you see often. The deck measures around 10.5mm across and uses a two-post design that takes a single coil build. It comes with everything needed to get started: cotton, wire, and screws, plus a 510 adapter if you want to test the build outside the pod first. Not a beginner's project, but a genuinely capable option for anyone who already builds on RTAs or RDAs and wants that flexibility in something pocket-sized.

Same Cartridge, Every Coil

All three coil types fit the same Pasito cartridge, so switching from Mesh to Ni80, or dropping in the RBA deck, does not mean buying a new pod each time. One cartridge, three very different vaping experiences depending on what you fit inside it.

Cotton That Actually Wicks Properly

Every coil in the range, including the RBA build, uses organic cotton rather than the synthetic wicking some budget coils rely on. Liquid moves through cleanly, break-in time is shorter, and the flavour comes through without the faint plastic edge that poorly wicked coils sometimes carry on the first few draws.

Smoant Pasito Coils Resistance Options

Two ready-built options and one build-your-own deck. Which one to reach for depends on how you like to vape and how much control you want over the setup.

#buttons

• 0.6ohm Mesh DTL
• 1.4ohm Ni80 MTL

How to Set Up the Smoant Pasito Coils

A few minutes either way, longer if you are building the RBA deck from scratch.

1. Pull the empty coil out of the base of the Pasito cartridge.

2. Push your new Mesh or Ni80 coil into place until it seats fully, or fit the RBA deck if you are running a custom build.

3. Prime the coil with two to three drops of e-liquid directly onto any exposed cotton or mesh before refitting.

4. Fill the cartridge with your chosen e-liquid, matching the coil to the right style: freebase for Mesh, nic salts or freebase for Ni80.

5. Leave the coil to settle for five to six minutes so the cotton fully saturates before your first draw.

6. Start at the lower end of the coil's rated wattage and adjust upward once you know how it performs.

What's in the Smoant Pasito Coils Box

The Mesh and Ni80 packs each contain three coils and nothing else; no cartridge or device included. The RBA pack contains one build deck, organic cotton, build wire, mounting screws, and a 510 adapter. No e-liquid in any pack.

Built for the Pasito Cartridge, Not Interchangeable Elsewhere

These coils are shaped specifically for the Smoant Pasito cartridge and are not designed to fit other Smoant pod systems, even ones released under a similar name. If your device is the original Pasito, all three coil types should seat correctly. Check your cartridge fitting against the coil base before ordering if you are at all unsure which pod generation you own, since later Pasito releases can use different internals.

Browse the Refillable Pod Kits range if you are shopping for a compatible device alongside these coils.

About Smoant

Smoant built the Pasito around a fairly simple idea: give pod vapers access to the same rebuildable flexibility that advanced tank users take for granted, without giving up the size and simplicity of a pod system. The RBA deck was one of the first genuinely rebuildable atomisers to appear in a pocket-sized pod format, developed through Smoant's in-house R&D work rather than being a bolt-on afterthought.

The Mesh and Ni80 coils sit alongside it as the more accessible route into the same device, so newer vapers and rebuild enthusiasts end up using the same cartridge platform side by side.

Stock Up and Save

Daily coil use adds up fast, and MTL coils in particular tend to need replacing sooner than DTL builds once you are vaping through them regularly. A spare three-pack on hand means a worn coil does not turn into a day without your Pasito.

Pirate Vapes ships every order same-day before 4 pm, and stock across the full range meets current UK TPD requirements, with an age-verified checkout and sales restricted to over 18s only.

Conclusion

The Smoant Pasito Replacement Coils give you real choice on a device that was built around exactly that idea. Run the Ni80 for a tight MTL draw, switch to the Mesh coil for bigger flavour and denser vapour, or take the RBA deck and build something entirely your own.

All three fit the same cartridge, so the only real decision is which vaping style you want on a given day. Browse the wider range of Vape Accessories alongside these coils at Pirate Vapes.

FAQs

Which coil should I start with?

The 1.4ohm Ni80 if you want a tight, familiar draw, or the 0.6ohm Mesh if you prefer bigger flavour and vapour. Most Pasito owners end up trying both.

Is the RBA deck suitable for beginners?

Not really. It is a genuine rebuild, so some prior coil-building experience helps before attempting it.

Can I use nic salts with these coils?

Yes, particularly with the 1.4ohm Ni80 coil. The Mesh coil at 0.6ohm suits freebase and shortfill liquids better given the higher wattage it runs at.

What comes in the RBA pack?

One build deck, organic cotton, wire, mounting screws, and a 510 adapter for testing outside the pod.

How often do the Mesh and Ni80 coils need replacing?

Typically one to two weeks with regular daily use, depending on liquid sweetness and how heavily you vape.

Do these coils fit other Smoant pod kits?

No. They are built specifically for the Pasito cartridge and are not interchangeable with other Smoant devices.