SMOK RPM C Pod Vape Kit

SMOK RPM C Pod Vape Kit

Set the power anywhere from 5W to 50W, and the SMOK RPM C shapes the vape around the coil you fit. This compact, refillable pod kit uses SMOK’s RPM 2 coil platform and features a 2ml pod with a convenient top-fill design. A 1650mAh battery sits behind it. Charging is over USB-C.

Fit the 0.3Ω mesh coil for warm direct-lung clouds, or drop in the 0.6Ω coil for a tighter draw, and the same RPM C pod kit handles MTL, RDTL and DTL. Everything reads out on a small OLED screen. It sits among our Refillable Pod Kits as a step up from a basic starter.

Why vapers choose this:

• Two coils, two styles from day one: the pre-installed 0.3Ω mesh coil pushes warm DTL vapour, while the spare 0.6Ω coil tightens things up for an RDTL or MTL draw, so one RPM C kit covers more than one way of vaping.

• Adjustable 5W to 50W output lets you match the power to the coil rather than accepting a fixed setting.

• Top-fill 2ml pod refills through a sliding cover without pulling the pod off the device.

• Smart coil detection reads the fitted coil and sets a sensible output automatically.

• 1650mAh battery with USB-C keeps a compact device going through a typical day and tops back up quickly.

SMOK RPM C Features

Smart Wattage With a 0.69-inch OLED Screen

The 0.69-inch OLED display shows your wattage, battery level and coil resistance, with two buttons below it for fine adjustment. The device recognises the coil you fit and sets a starting output for it, so there is no guesswork before your first draw. Nudge the power up or down to suit the coil and the e-liquid, and the reading updates as you go.

Stepless Airflow Control

Rather than a few fixed slots, the RPM C uses a stepless airflow toggle that slides smoothly from a tight, restricted pull to a wide, airy one. That single control changes both the warmth and the volume of the draw, so the same RPM C pod kit can feel like an MTL device one minute and an RDTL one the next.

Runs the SMOK RPM 2 Coil Range

Compatibility with the SMOK RPM 2 coil series is the practical heart of this kit. The included 0.3Ω mesh coil is built for direct-lung vapour, and the 0.6Ω coil suits a cooler, tighter draw. Because the range is well established, fresh heads are easy to keep in stock through our SMOK Coils selection.

Top-Fill 2ml Refillable Pod

The 2ml pod fills from the top: slide the mouthpiece cover back, add your liquid, and close it again, all without removing the pod. A clear pod window keeps your level in view, and the mesh coil pairs best with a High VG E-Liquid on the 0.3Ω head.

Inhale or Button Firing With Seven Protections

The RPM C fires on inhale for a draw-to-activate feel, or on the button if you prefer to press. Behind that sits a set of seven hardware protections covering short-circuit, overheating, and over-discharge, the sort of everyday safeguards that make a device easy to trust in a pocket or bag.

SMOK RPM C Colours

The RPM C comes in seven finishes, spanning solid tones, two-tone fades and see-through shells, all on the same compact body. The look is the only thing that changes, since every finish runs the same battery, output, and RPM 2 coil platform underneath.

#buttons

• Green Blue
• Matte White
• Pink
• Purple Orange
• Transparent Black
• Transparent Blue
• Transparent Red

How to Set Up the SMOK RPM C

1. Fit a coil by pressing the chosen RPM 2 coil firmly into the base of the pod until it seats flush. Choose the 0.3Ω mesh coil for a cloudier vape, or switch to the 0.6Ω option for a more restricted draw.

2. Prime the coil with two or three drops of e-liquid onto the exposed cotton ports so it is not dry on the first fire.

3. Slide the top cover open and fill the 2ml pod, keeping clear of the central airflow tube, then close the cover firmly.

4. Seat the pod onto the device until it clicks into place.

5. Let the coil absorb the e-liquid for a few minutes before firing, since a dry sub-ohm coil scorches quickly.

6. Set the wattage to match the coil, starting low and stepping up until the draw feels right.

What's in the SMOK RPM C Box

Each kit includes:

• 1 x SMOK RPM C Device (1650mAh)

• 1 x SMOK RPM C Pod (2ml UK TPD capacity)

• 1 x RPM 2 Mesh 0.16Ω coil (pre-installed)

• 1 x RPM 2 DC 0.6Ω MTL coil (spare)

• 1 x USB Type-C charging cable

• 1 x User manual

No e-liquid is supplied, so add a bottle to get started, and there is no mains plug in the box.

Made for the SMOK RPM 2 Coil Series

The RPM C runs the SMOK RPM 2 coil range and nothing else, covering mesh options for direct-lung clouds through to higher-resistance heads for a restricted draw. Keep a couple spare and the kit stays cheap to run.

Explore the wider SMOK Vape Range for matching hardware, and grab fresh Replacement Pods from Pirate Vapes when an old one starts to cloud over. What does not fit: original RPM coils, RPM 3 coils, Nord or LP1 heads. If the coil box does not say RPM 2, it is not for this device.

About SMOK

SMOK has spent over a decade building vaping hardware, and the RPM line, short for Real Pod Mod, is where the brand puts mod-style control into a pod-sized body.

The RPM C distils that idea into a simpler, more pocketable device: a single-button layout, smart coil recognition, and stepless airflow, all built around the widely stocked RPM 2 coil platform. It suits vapers who want adjustable power and a choice of draw styles without carrying a separate mod and tank.

Stock Up and Save

Coils are the running cost on any refillable kit, so keep a few RPM 2 heads and a spare pod in the drawer rather than buying one at a time.

Order before 4 pm and Pirate Vapes dispatches the same day, with Free Pirate Post over £40. Checkout is age-verified, over-18s only, and the pods are the 2ml TPD size.

Conclusion

The SMOK RPM C pod kit is a compact, flexible refillable device: a 1650mAh battery, 5W to 50W of power, a 2ml top-fill pod and the deep RPM 2 coil range behind it.

Two coils in the box let you find your style on day one, and the stepless airflow tunes each draw to taste. Pair it with fresh coils and Vape Accessories at Pirate Vapes to build a setup that lasts.

FAQs

Is the SMOK RPM C refillable?

The RPM C is a fully refillable device. It uses a 2ml pod with a sliding top-fill cover and press-fit RPM 2 coils, so you add your own e-liquid and swap coils when the flavour fades.

Which coils fit the RPM C pod kit?

Only the SMOK RPM 2 coil series. It ships with a 0.3Ω mesh coil and a 0.6Ω coil, and the wider RPM 2 range drops straight in. Original RPM, RPM 3, and Nord coils do not fit.

Do I set the RPM C wattage myself?

You do, and the OLED screen makes it simple. The device suggests a starting point for the coil it detects, and the two buttons let you fine-tune anywhere across the 5W to 50W range.

What e-liquid works best in the RPM C vape kit?

A high-VG 70/30 shortfill suits the 0.3Ω mesh coil for clouds. On the 0.6Ω coil, a 50/50 blend or a nic salt at a low freebase strength of around 3mg to 6mg gives a smoother, tighter draw.

How long does an RPM C coil last?

Usually one to two weeks depending on wattage and how sweet your e-liquid is. Rotating between the 0.3Ω and 0.6Ω coils, and refilling before the pod runs low, helps each one last longer.

Does the RPM C have adjustable airflow?

The RPM C uses a stepless airflow toggle that slides from a tight, restricted draw through to a wide, airy one, so you can set the feel of the inhale exactly where you want it.