SMOK RPM C Replacement Pods

SMOK RPM C Replacement Pods

Worn pods are what put a decent pod kit in a drawer. A couple of these spares keep the SMOK RPM C in service instead. Each RPM C pod refills to 2ml, the UK legal limit for a nicotine cartridge. Filling is done from the top: slide the cap back, add liquid, close it.

The pod seats on the original magnetic connection. It takes the same RPM 2 coil range. A low-resistance mesh coil gives DTL clouds; the 0.6ohm DC coil pulls a tighter MTL draw. Sold in a pack of 3, with more spares in the Replacement Pods collection.

Why vapers choose this:

• Genuine SMOK fitment means these RPM C pods seat with the same magnetic click and press-fit coil hold as the cartridge that shipped with your kit, with no rattle or loose contact.

• 2ml TPD-compliant capacity keeps the pod legal for UK sale while still holding a full session's worth of liquid.

• Full RPM 2 coil support lets one pod cover both MTL and DTL depending on the resistance you drop in.

• Sliding top-fill refills from the top without removing the pod, so there is less mess.

• Clear PCTG window shows your juice level at a glance, so you top up before you run dry.

SMOK RPM C Pod Features

2ml Refillable Cartridge

The RPM C refill pod carries a 2ml e-liquid capacity, the maximum permitted for a nicotine pod sold in the UK. Refilling instead of replacing a whole device is the practical reason vapers keep spare pods on hand, and a fresh cartridge restores clean flavour once an old one starts to taste muted.

Sliding Top-Fill Design

Refills happen from the top. Slide the mouthpiece section back to reveal the fill port, add your liquid, then close it before vaping. Because the pod stays seated in the device, the top-fill system keeps the process tidy and quick between sessions.

RPM 2 Coil Compatibility

These SMOK RPM C pods are built around the RPM 2 coil series, which spans low-resistance mesh options for DTL clouds through to higher-resistance DC coils for a tighter MTL draw. Coils press-fit into the base of the pod, so changing resistance is a straightforward push-and-seat. Stock up on matching heads from the SMOK Coils Collection.

Magnetic Pod Connection

A magnetic base holds the pod in the RPM C body and lifts out cleanly for refilling or coil changes. There are no threads to line up and nothing to over-tighten, which makes the swap fast even one-handed.

Durable PCTG Construction

The pod body is moulded from PCTG, a tough clear plastic that resists cracking under daily handling while keeping the e-liquid level visible. That transparency is the small detail that stops you from dry-burning a coil, since you can see when a top-up is due.

SMOK RPM C Pod Compatible Coils

The RPM C pod is designed for the SMOK RPM 2 coil series, which is where you tune the vape to your style. Coils are sold separately from the pods.

#buttons

• 0.16ohm RPM 2 Mesh
• 0.3ohm RPM 2 Mesh
• 0.6ohm RPM 2 DC MTL

How to Swap Your RPM C Pod

Swapping the pod and fitting a coil takes under two minutes.

1. Lift the old pod straight out of the RPM C body to release the magnetic connection.

2. Press-fit an RPM 2 coil firmly into the base of the new pod until it seats fully.

3. Slide open the top-fill cap and add your chosen e-liquid up to the 2ml line, then close the cap.

4. Stand the filled pod upright for a few minutes so the coil wicks soak before first use.

5. Drop the pod back into the device until the magnets click, then start at a lower wattage and adjust to taste.

What's in the SMOK RPM C Pods Box

A single pack gives you three spare cartridges to rotate.

• 3x SMOK RPM C replacement pods (2ml, empty)

Coils, e-liquid, and the RPM C device are not included and are bought separately.

Made for the SMOK RPM C Kit

These replacement pods are made specifically for the SMOK RPM C pod kit and take the RPM 2 coil range. They are the correct cartridge for that device and restore it to full working order when an original pod wears out or leaks.

They are not interchangeable with pods from other SMOK generations such as the RPM, RPM 2, Nord or RPM 5 systems, even where names look similar, so check your device is the RPM C before ordering. For heads to go inside them, see the wider Vape Coils Range.

About SMOK

SMOK is one of the longest-running names in UK vaping, and the RPM line is a big part of why. The RPM series built its reputation on pod-mod versatility: a compact device that swaps between MTL and DTL by changing a coil rather than the whole setup.

The RPM C continues that idea with the established RPM 2 coil platform, which means owners get a well-supported ecosystem of pods and coils rather than a one-off cartridge that vanishes from shelves.

That ongoing availability is exactly what makes SMOK hardware worth keeping topped up with spares, and it is why Pirate Vapes carries the matching RPM C pods and RPM 2 coils side by side.

Stock Up and Save

Refill pods are a consumable, so a spare pack in the drawer keeps your RPM C running when the current cartridge tires.

Pirate Vapes ships these SMOK RPM C pods to UK vapers through an age-verified checkout, with Free Pirate Post on orders over £40. Order a pack of three and a clean cartridge is always ready when flavour starts to fade.

Conclusion

The SMOK RPM C refill pods are the straightforward way to keep your RPM C kit performing, with a 2ml TPD-compliant capacity, full RPM 2 coil support and a tidy sliding top-fill. Buy them in threes so you always have a clean cartridge ready when the old one tires.

Explore more spares in the Vape Accessories collection and pair them with a suitable juice from the Nic Salts Range at Pirate Vapes.

FAQs

How many pods come in a pack of SMOK RPM C pods?

Each pack contains three empty 2ml replacement pods. Buying them in threes gives you spares to rotate as older cartridges wear out.

Do the SMOK RPM C replacement pods come with coils?

The RPM C pods are supplied empty with no coil fitted. You buy RPM 2 coils separately and press-fit your chosen resistance into the base of each pod.

What coils fit the RPM C refill pod?

The pod is built for the SMOK RPM 2 coil series, which includes mesh options such as the 0.16ohm and 0.3ohm for DTL and the 0.6ohm DC MTL coil for a tighter draw.

Can I use the RPM C pods for both MTL and DTL vaping?

The RPM C pod supports both styles depending on the coil you fit. Lower-resistance mesh coils suit direct-to-lung, while the 0.6ohm DC coil is better for mouth-to-lung.

How do I fill the SMOK RPM C pod?

Slide the top cap back to reveal the fill port, add your e-liquid up to the 2ml mark, then close the cap. The pod fills from the top so it can stay seated in the device.

How often should I replace the RPM C pod?

Replace the pod when flavour drops off, the plastic clouds, or you notice leaking, even after fitting a fresh coil. Rotating between spares in a pack of three extends how long each cartridge stays clean.