Snowwolf WF Mini 0.28 Ohm Coils

Snowwolf WF Mini 0.28 Ohm Coils

A 0.28ohm sub-ohm head rated for 30-60W, sold five to a pack. These are the genuine WF Mini replacement coils for Snowwolf's Wolf Mini sub-ohm tank, built on a 316L stainless steel heating element with organic cotton wicking for a warm, cloud-heavy DTL draw.

The wide wicking ports pull thick liquid efficiently, which keeps flavour clean deeper into each head's life. If your Wolf Mini tank has started to taste dull or crackle, a fresh five-pack is the fix. Browse more Vape Coils to keep every tank running.

Why vapers choose these coils:

• They are the genuine Snowwolf head for the Wolf Mini tank, and coil authenticity matters more than people think. Counterfeit sub-ohm coils wick unevenly, taste off, and burn out early, so a real five-pack is the difference between a tank that performs and one that spits and dry-hits.

• 316L stainless steel runs clean in wattage mode and opens the door to temperature control on a mod that supports it.

• The round wicking surface feeds liquid from a wider area than boxy older coils, which holds flavour steady for longer.

• A pack of five covers weeks of sub-ohm use.

• 30-60W range gives you room to dial in warmth without hunting through menus.

Snowwolf WF Mini Coil Features

Mesh and Regular Coil Options

This is a proper 0.28ohm sub-ohm head, so expect warm vapour and a direct-to-lung draw rather than the tight pull of a pod device. Paired with the right liquid, it throws dense clouds and pushes flavour hard. It belongs on a mod that can comfortably fire sub-ohm, which is worth saying plainly before anyone drops it on an underpowered device.

Different Resistance Options

Stainless steel is the quiet workhorse of coil wire. It fires cleanly in standard wattage mode and, on a mod that reads it, unlocks temperature control for a more consistent draw and fewer dry hits. That flexibility is a genuine advantage over a plain Kanthal build. Small detail, but it is the sort of thing that separates a decent coil from a forgettable one.

Ideal for Nic Salts and 50/50 E-Liquid

The wicking here is organic cotton, and the coil is shaped with a rounded contact surface rather than a flat one. More cotton touching more liquid means quicker saturation between puffs, which is what keeps the flavour from thinning out as the head ages. It also pairs best with high-VG juice, so reach for our High-VG E-Liquid rather than a thin 50/50.

Low-Wattage Coil Design

These wicking ports are cut for 70/30 or thicker e-liquid. That is deliberate. Thin, high-PG juice floods a sub-ohm coil and leaks; thick high-VG juice is exactly what the ports are sized to handle. Shortfills are the natural match, and our 70/30 Shortfills cover most of what works well here.

Compatible With VooPoo PnP Pods

Sub-ohm coils are consumables. Run them daily, and you will change one every one to two weeks, sooner with dark or sweet liquids that gunk the cotton faster. Buying five at once means you are never stuck mid-tank waiting on a delivery.

Snowwolf WF Mini Coil Resistance

The 0.28ohm WF Mini head is the workhorse of the Wolf Mini coil system. Rated for 30-60W, it suits vapers who want a warm sub-ohm draw with strong flavour and solid cloud without pushing into high-power territory. Start low, climb gradually, and settle where the taste is fullest for you.

#buttons

• 0.28ohm WF Mini
  

How to Set Up the Snowwolf WF Mini Coils

A quick swap once you have done it once. Two minutes, and the soak is the part that matters.

1. Empty and disassemble the tank. Unscrew the base of your Wolf Mini tank from the glass section.

2. Remove the spent coil by unscrewing it anti-clockwise from the base hardware.

3. Prime the new head. Drip a few drops of e-liquid straight down the centre hole onto the coil wire, and a drop onto each of the exposed cotton windows around the outside.

4. Screw the fresh WF Mini coil firmly clockwise into the tank base until it is secure, then reassemble the tank.

5. Fill the tank with high-VG liquid and seal it.

6. Let it soak for a full ten minutes so the thicker juice fully saturates the cotton before any power hits it. Rushing this is the single most common way to kill a new sub-ohm coil.

7. Start at 30W and take a few gentle draws, nudging the wattage up until the flavour and warmth feel right. Do not exceed 60W.

What's in the Snowwolf WF Mini Coil Box

Five genuine Snowwolf WF Mini 0.28ohm replacement coils. No tank, no mod, no e-liquid, just the coils. If you need the tank itself or a fresh glass to go with the swap, those are separate.

The Coil That Fits the Snowwolf Wolf Mini Tank

The WF Mini 0.28ohm is made for the Snowwolf Wolf Mini sub-ohm tank, the 25mm tank that ships with the Snowwolf Mini 100W kit and the Mfeng Baby kit. Any tank built to take the WF Mini coil system will accept it. Because these are sub-ohm heads, run them on a regulated mod that can fire down to 0.28ohm safely. Browse our Regulated Mods if you need a host, and our wider Vape Tanks if you are rebuilding a setup.

What will not fit: the full-size Wolf WF and WF-H coils used in the larger MFENG and Wolf tanks. Those are a bigger platform entirely. If your current coil says "WF Mini" printed on the side, you are in the right place.

About Snowwolf

Snowwolf is Sigelei's flagship sub-brand, best known for the raised three-dimensional wolf logo on its mods and its bold, industrial hardware design. The Wolf Mini tank and its WF Mini coil system were built to pair with the brand's compact mods, delivering sub-ohm performance from a 25mm tank without the bulk of a full-size setup.

These coils are the genuine replacement heads for that system, made to the same stainless-steel-and-cotton spec Snowwolf shipped the tank with. For anyone still running a Wolf Mini, they are the coil the tank was designed around.

Stock Up and Save

Coils are the one part of a sub-ohm setup you will always need again, so a spare pack in the drawer is never wasted. Grab a second five-pack, and you are covered for a couple of months of daily vaping without a single dead-tank evening.

It is also worth keeping a fresh Replacement Tank Glass on hand for the same reason. Every order from Pirate Vapes ships same day before 4 pm through an age-verified, over-18s checkout, and these are 100% genuine Snowwolf coils, not counterfeits.

Conclusion

The Snowwolf WF Mini 0.28ohm coils do one job and do it well: they keep a Wolf Mini tank tasting as it should. Genuine 316L stainless steel, organic cotton, a 30-60W window and five heads to a pack make this the simplest way to revive a sub-ohm setup that has gone flat.

If you run the Wolf Mini and want clean, warm DTL clouds again, this is the coil. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Which tank do WF Mini Replacement 0.28 ohm coils fit?

The Snowwolf Wolf Mini sub-ohm tank, the 25mm tank included with the Snowwolf Mini 100W kit, and the Mfeng Baby kit. They will not fit the larger full-size Wolf or MFENG tanks.

What wattage should I run the WF Mini 0.28ohm coil at?

Anywhere from 30 to 60W. Start at 30W and climb until the flavour is fullest. Most vapers settle in the mid-40s to low-50s.

What e-liquid works best with WF Mini Replacement 0.28 ohm Coils?

High-VG juice, 70/30 or thicker. Thin, high-PG liquid will leak and wick poorly through a sub-ohm coil like this. Shortfills are the natural pairing.

How long does one WF Mini Replacement 0.28 ohm coil last?

Usually one to two weeks of daily use. Dark, sweet, and heavily sweetened liquids build residue on the cotton faster and shorten that.

Can I use temperature control with WF Mini Replacement 0.28 ohm Coils?

Yes. The 316L stainless steel element supports temperature control on a mod that reads it, though it also runs perfectly well in standard wattage mode.

Are WF Mini genuine Snowwolf coils?

Yes. These are authentic Snowwolf WF Mini heads, not clones. Genuine coils wick and last as they should, which cheap copies rarely do.