Uwell Aeglos P1 Replacement Pods

Lost the pod that came with your Aeglos P1, or is the current one tasting muted and leaking at the base? This is the genuine refillable cartridge that clicks straight back into Uwell's Aeglos P1 pod mod. It fills to the 2ml UK limit through a silicone-stoppered bottom port, seats onto the device with a magnetic connection, and takes the same Aeglos P1 coils you are already running.

There is no coil pre-fitted, so you add your own. One pod per pack. A sensible pickup if the kit still fires fine and only the pod has worn out. Sits neatly alongside our other Refillable Pod Kits and empty replacement pods.

Why vapers choose this:

• It is the pod, not a whole new kit. If your Aeglos P1 still charges and fires as it should, swapping a fresh cartridge in is far cheaper than replacing the device, and it fixes the two things that actually go wrong: a spent seal and a tired flavour path.

• Magnetic seating drops it in and holds it firm. No threading, no lining up tabs.

• Bottom fill through a silicone stopper keeps the top of the pod clear and makes topping up quick.

• Two airflow slots for draw control.

• Runs Aeglos P1 coils and the original Aeglos coils, so you are not locked to a single resistance.

Uwell Aeglos P1 Replacement Pod Features

The Fix for a Leaky or Faded Pod

Pods are consumable. Seals soften, the plastic clouds, and flavour drops off long before the device itself gives up. Rather than bin a working Aeglos P1, you drop in a fresh cartridge, and the kit performs as it did out of the box. Thing is, most people replace the whole mod when they only ever needed the pod.

Why Bottom Filling Matters

The silicone-stoppered bottom fill means you flip the pod, lift the plug, and fill from underneath. It keeps liquid away from the mouthpiece and the airflow path, which is where messy top-fill pods tend to weep. Pair it with a 50/50 or higher-PG nic salt, and wicking stays consistent.

Dual Airflow, One Pod

Two slotted inlets on the base let you set the draw. Close them down for a tighter mouth-to-lung pull, open them for something airier. That flexibility is unusual on a replacement pod, and it means a single cartridge covers more than one vaping style depending on the coil you seat.

Magnetic and Quick to Swap

No screw threads. The pod locates by magnet, snaps home, and comes out just as easily for refilling or a coil change. Practically speaking, it is a five-second job.

Built Around Your Existing Coils

The pod does not arrive with a coil, which sounds like a catch until you realise it means you keep using the resistances you already like. Both the Aeglos P1 coil line and the original Aeglos coils seat inside it.

Which Coils Go in the Aeglos P1 Pod

The pod is the shell. Your draw and vapour come from the coil you fit, and Uwell built two main options for it. Both are plug-and-play push-fit, and both are sold separately.

Most people start with the 0.6ohm Aeglos P1 coil or the original 0.8ohm Aeglos coil for a tighter mouth-to-lung draw. They suit 10mg or 20mg nic salts, sip less liquid, and give the cigarette-style pull most ex-smokers are after. 

The 0.2ohm Aeglos P1 coil and original 0.23ohm coil are the warmer, cloudier options, better paired with lower-strength or 50/50 liquid and an opened-up airflow. Older original Aeglos coils will also seat perfectly if you already have a stash. Browse the full Uwell coils range to match a resistance to how you vape.

• 0.6ohm or 0.8ohm: tighter MTL, best with 10-20mg salts

• 0.2ohm or 0.23ohm: warmer, airier draw, lower-strength or 50/50 liquid

• Both Aeglos P1 and original Aeglos coils push-fit straight into the base

How to Set Up the Uwell Aeglos P1 Replacement Pod

Quick job. A couple of minutes and you are back vaping.

1. Lift the used pod off the device and set it aside.

2. Push your chosen coil firmly into the base of the new pod until it clicks flush.

3. Put three to four drops of e-liquid directly onto the exposed cotton of the coil to wet it before filling.

4. Open the silicone bottom plug, tilt, and fill with your nic salt or 50/50 liquid to just under the max line, then reseal the plug.

5. Stand the filled pod upright and leave it to wick for a full seven minutes so the cotton saturates properly. Skipping this is how coils get scorched.

6. Seat the pod on the mod and start on a low, gentle draw, building up once you know the flavour is coming through clean.

What's in the Uwell Aeglos P1 Replacement Pod Box

One empty Aeglos P1 refillable pod. That is it. No coil is fitted, no e-liquid is included, and there is no device in the box. If you are rebuilding a kit from scratch, you will need a coil and a bottle of liquid to go with it.

Made Only for the Uwell Aeglos P1

This cartridge is cut specifically for the Aeglos P1 pod mod and nothing else in the Uwell catalogue. It will not fit the Caliburn line, the Aeglos Legend, or any other Uwell pod system, because each of those runs its own pod platform.

If the device in your hand says Aeglos P1 and the pod seats by magnet, you are in the right place. It slots into the wider MTL Vape Kits style of vaping most Aeglos owners run.

About Uwell

Uwell built its name on flavour-first coil design, and the Aeglos P1 sits in its pod-mod chapter: a compact device aimed at vapers who wanted mod-style airflow control without carrying a full box mod. The P1 pod was designed around Uwell's own coil fitment and magnetic seating, part of the same engineering thinking that made the Caliburn and Nunchaku ranges household names in UK vaping.

Keeping a genuine Uwell pod in the device matters, because third-party shells rarely seal or wick the way the original does. That coil-led engineering runs right through the Uwell range.

Stock Up and Save

Pods are the part that wears first, so keeping a spare in the drawer means you are never stuck with a leaking cartridge and no backup. Grab one now, one for later.

Every order from Pirate Vapes is dispatched the same day when it is placed before 4 pm, packed to arrive intact. All stock is TPD compliant, sold through an age-verified checkout, and strictly over-18s only.

Conclusion

The Aeglos P1 replacement pod does one job and does it properly: it brings a worn or leaking cartridge back to factory condition without you buying a new device. Magnetic seating, bottom filling, dual airflow, and fitment for the coils you already own.

Add a coil and a bottle of liquid, and you are sorted. Pick up your next pod alongside the matching Uwell Vapes range and browse vape accessories for coils and spares, all in one order at Pirate Vapes.

FAQs

Does the Aeglos P1 pod come with a coil?

No. The pod ships empty with no coil fitted. You add your own Aeglos P1 coil, so budget for one if you do not already have spares.

Which coils fit the Aeglos P1?

Both the 0.2ohm and 0.6ohm Aeglos P1 coils, plus the original Aeglos 0.23ohm and 0.8ohm coils. They all push straight into the base.

Will the Aeglos P1 fit my Caliburn?

No. This pod is for the Aeglos P1 only. Other Uwell devices use different pods.

How do I fill the Aeglos P1?

Bottom fill. Lift the silicone stopper underneath, tilt, add liquid to just below the max line, and reseal. Best with 50/50 or nic salt e-liquid.

Isn't the Aeglos P1 pod a 4ml pod?

The pod's original international design held up to 4.0ml, but UK versions are sold to the 2ml TPD limit. Only fill to the marked UK line.

How long does one Aeglos P1 pod last before it needs replacing?

Depends on your liquid and how often you vape, but most people get a few weeks out of a pod before flavour or seal quality drops. Sweeter liquids shorten that.