VooPoo Drag H40 Pod Kit

VooPoo Drag H40 Pod Kit

Forty watts from a device that slips into a jeans pocket. The VooPoo Drag H40 pairs a 1500mAh built-in battery with a 5W to 40W output range and the full PnP coil platform, which makes it one of the more capable compact pod mods for anyone moving into DTL vaping.

It ships with the upgraded PnP Pod II, a 0.54-inch OLED display, adjustable airflow and a 360° leather-wrapped zinc alloy body. If you want a small refillable pod kit that still gives you real control over the draw, this is a sensible place to start. Over 18s only.

Why vapers choose this:

• Smart mode does the thinking for you. Drop a coil in and the GENE.AI chip reads its resistance, then sets a sensible wattage on its own, so there is no menu-diving before your first vape.

• 1500mAh in a genuinely pocket-sized shell that most people can push through a full day on.

• Two coils in the box means two draw styles ready to go, no extra purchase needed.

• RBA mode for manual control up to 40W when you want to fine-tune.

• Magnetic pod fitting that clicks in cleanly and will not rattle loose in a bag.

VooPoo Drag H40 Features

The GENE.AI Chip Reads Your Coil

Smart mode is the headline here. Fit any compatible PnP coil and the chip recognises its resistance, then dials the wattage into the right band automatically. Prefer to set it yourself? Switch to RBA mode and adjust anywhere across the 5W to 40W range. Two ways to vape, one small device.

Real DTL From Something This Size?

Yes, and that is the point of the H40. The 0.45ohm VM3 coil at a warmer setting produces the kind of dense, flavourful direct-lung vapour you would normally expect from a much bigger mod. Airflow is fully adjustable by rotating the pod, so you can tighten it towards MTL or open it right up.

Upgraded PnP Pod II With a Swappable Tip

The PnP Pod II is the practical upgrade in this kit. It fills from the side, holds 2ml in line with UK rules, and has a replaceable drip tip, which is rare at this size. Coils are compatible across the VooPoo PnP Coils platform, so you are not locked into the two in the box.

Charge It, Read It, Lock It

A 0.54-inch OLED display keeps wattage, battery level and coil resistance in view. USB Type-C handles charging, and there is a lock function to stop accidental firing in a pocket. Six built-in protections cover the usual short-circuit, overheat and low-battery cases.

Built to Be Handled

The zinc alloy frame with its 360° leather wrap feels a step above the plastic pod kits it competes with. It sits well in the hand, grips without slipping, and the eight colour finishes give you a proper choice rather than the usual black-or-black.

VooPoo Drag H40 Colours

Eight leather-wrapped finishes are stocked, so you can match the H40 to your own taste rather than settle for whatever is left.

#buttons

• Black
• Green
• Gunmetal
• Modern Red
• Pink
• Silvery White
• Sky Blue
• Snow Blue

How to Set Up the VooPoo Drag H40

Quick to get running. A couple of minutes, then a short wait.

1. Charge the device fully over USB Type-C before first use. The OLED shows the battery level as it tops up.

2. Pull the pod off the magnetic base and open the side-fill port.

3. Add two or three drops directly onto the coil window first, then fill the pod with your e-liquid to just below the max line and close the port firmly.

4. Click the pod back on. The magnets seat it in one push.

5. Leave the filled pod standing upright for a full seven minutes so the cotton draws liquid all the way through. Firing a dry coil scorches it permanently, and no setting recovers it after that.

6. Start low and let Smart mode set the wattage, or use RBA mode and build up gradually until the draw feels right.

What's in the VooPoo Drag H40 Box

You get:

• the Drag H40 device,

• one PnP Pod II,

• the pre-installed 0.45ohm PnP-VM3 coil,

• a spare 0.3ohm PnP-TW30 coil,

• a USB Type-C cable

• and the user manual.

There is no e-liquid included. For the lower-resistance coils here, a 70/30 Shortfill suits the DTL draw, while a Nic Salt works better if you tighten the airflow for MTL.

Made for the VooPoo PnP Coil Platform

The Drag H40 runs the whole PnP coil range, not just the two coils supplied. That opens up MTL, restricted-DTL and DTL options depending on which coil you fit, and spare pods are easy to source through the Replacement Pods section.

What it does not take is the newer PnP-X platform used by the Drag H40 Pro. Those are a different pod and coil format and will not fit this device. If a coil says PnP or PnP II and press-fits into the pod, you are in the right place. If it says PnP-X, it belongs to the Pro.

About VooPoo

VooPoo built its name on the Drag series and the GENE chipset family that runs through it. The Drag H40 takes that heritage and shrinks it: the same fast-firing GENE.AI board and the well-supported PnP coil platform, now in a pod mod small enough to carry all day.

That coil platform is the real strength here, since it spans dozens of resistances and has been carried across multiple VooPoo devices, which keeps replacements easy to find years after launch.

Stock Up and Save

Each PnP coil in the H40 lasts a good stretch of refills before the flavour drops off, so a spare pack keeps you going for weeks rather than days. Pirate Vapes ships every order the same day before 4pm in padded packaging, with tracking as standard.

All stock is TPD compliant, checkout is age-verified, and we sell to over-18s only. Free Pirate Post applies on orders over £40, and The Crow's Nest subscription trims the cost of regular coil and pod top-ups.

Conclusion

The VooPoo Drag H40 is a compact pod mod that punches above its size: 40W of adjustable power, a genuine DTL draw, two coils in the box and a leather-wrapped build that feels properly made. It suits vapers stepping up from a basic pod kit who want real control without carrying a full mod.

If that sounds like you, it is an easy recommendation. Explore the full VooPoo Range, pair it with the right Vape Accessories, or head back to Pirate Vapes to browse the rest of the shelf.

FAQs

What coils does the H40 use?

The full PnP coil range. It comes with a 0.45ohm VM3 and a 0.3ohm TW30, and accepts other PnP and PnP II coils. It does not take PnP-X coils.

Can the H40 do MTL as well as DTL?

Yes. Rotate the pod to tighten the airflow and fit a higher-resistance PnP coil for an MTL draw. Open it up with a lower-resistance coil for DTL.

How big is the H40 pod?

2ml, in line with UK TPD limits. The pod format is sold as 5ml in some overseas markets, but UK versions are filled to 2ml.

How long does the H40’s battery last?

The 1500mAh cell gets most vapers through a full day. Higher-wattage DTL use drains it faster, and USB Type-C tops it back up.

What is the difference between Smart and RBA mode in the H40?

Smart mode sets the wattage for your coil automatically. RBA mode lets you choose it yourself, anywhere from 5W to 40W.

Is the H40 good for a first sub-ohm device?

It is one of the friendlier ways in. Smart mode removes the guesswork, and the two included coils let you try different draws before buying anything else.