VooPoo TM Replacement Coils

VooPoo TM Replacement Coils

Five coils per pack, five resistances to pick from, one Plug and Play fitment. These VooPoo replacement coils run from a 0.6ohm mesh for looser, warmer draws down to a tight 1.2ohm for a cigarette-style pull, all built on VooPoo's press-in PnP platform.

They suit MTL and restricted vapers on VooPoo's Drag, Argus and Vinci pod kits, and pair best with nic salts or 50/50 e-liquid. No screwing, no fuss: the old coil pulls out, the new one clicks in. Browse the wider Voopoo Coils range or all Replacement Vape Coils at Pirate Vapes.

Why vapers choose these:

• Five resistances, one platform. The same press-in fitment covers everything from a warmer 0.6ohm mesh to a tight 1.2ohm, so you can change your whole draw style without changing device.

• Genuine PnP coils. Built for VooPoo's own pod kits rather than a third-party copy.

• Mesh where it counts. The TM and TR coils use a mesh element for cleaner, more even flavour than older wire builds.

• Nic-salt friendly. Tight draw, low wattage, ideal for salts.

• Simple swaps. Pull the old one out, push the new one in. No threading, no tools.

VooPoo TM Coils Features

Mesh and Regular Coil Options

Two of these are regular wire coils, the R1 and R2, while the TM1, TM2 and TR1 use a mesh element. Mesh heats more evenly across a larger surface, so flavour comes through cleaner and the coil tends to gunk up more slowly. If flavour is your priority, lean towards the mesh options. Both types share the same press-in base.

Different Resistance Options

That is the real question with this pack. The 0.6ohm gives a looser, warmer restricted draw at higher power, while the 1.2ohm pulls tight and cool like a cigarette. The 0.8ohm and 1.0ohm sit in between. Pick by how you like to inhale, not just by number. There is a full breakdown further down.

Ideal for Nic Salts and 50/50 E-Liquid

These resistances run best with nic salt or 50/50 e-liquid. The wicking ports are sized for thinner juice, so high-VG shortfills will struggle to keep up and can dry-hit. Match them with Nic Salt E-Liquids or a balanced 50/50 E-Liquid blend, and they perform as intended.

Low-Wattage Coil Design

Nothing here climbs past roughly 25W. On an Argus or Drag pod battery, that light power draw means you are not reaching for the charger every few hours. It also keeps the coils lasting longer, since they are not being pushed hard.

Compatible With VooPoo PnP Pods

These are made to drop straight into VooPoo's PnP pods. If your device already takes PnP coils, one of these five will fit. The trick is matching the resistance to your device's wattage ceiling, which the setup and compatibility sections cover.

VooPoo TM Coils Resistance Options

Five options in the picker, all aimed at MTL and restricted-draw vapers. The choice comes down to how tight you want the draw and how much vapour you are after.

#buttons

• Pnp - R1 - 0.8 Ohm
• PnP - R2 - 1.0ohm
• PnP - TM1 - 0.6ohm
• PnP - TM2 - 0.8ohm
• PnP - TR1 - 1.2ohm

How to Set Up the VooPoo TM Coils

Quick press-in swap, no tools needed.

1. Take the pod off the device and tip out any old e-liquid if you are cleaning it.

2. Pull the old coil straight down out of the base of the pod. It is press-fit, so it lifts out without unscrewing.

3. Prime the new coil by dripping a drop or two of e-liquid straight down the top centre hole onto the internal mesh/wire, and a drop onto each of the exposed cotton side ports.

4. Push the new coil firmly up into the pod base until it seats flush.

5. Refill the pod, then let the new setup sit upright for eight to ten minutes so the cotton saturates fully. Firing a dry coil will instantly and permanently burn it.

6. Start at the lower end of the coil's wattage band and build up gradually until the draw feels right.

What's in the VooPoo TM Coils Box

Five coils in your selected resistance. No pod, no device, and no e-liquid are included. Just the five-pack of coils.

Made for VooPoo's PnP Pod Kits

These coils fit VooPoo Devices built on the PnP platform. That covers the Drag pod series (Drag S, Drag X), the Argus range (Argus, Argus Pro), the Vinci series, and the Navi.

Note: While these coils physically fit the standard wide-bore PnP pod that comes with most kits, because they are designed for a tighter draw, they perform best when paired with the dedicated narrow-mouthpiece VooPoo PnP MTL Pod.

What they do not fit: VooPoo devices that run on the TPP or ITO coil platforms use a different fitment, so these PnP coils will not seat in those. Always match the coil platform to your pod, not just the brand.

About VooPoo

VooPoo's PnP system is one of the reasons the brand became a fixture in UK vaping. Rather than tie each device to a single coil, VooPoo built one press-in platform that spans dozens of resistances, from tight MTL heads like these up to high-power cloud coils. That means a single Drag or Argus pod can cover several vaping styles just by swapping the coil.

Paired with VooPoo's Gene chipsets on the mod side, the PnP range gave vapers consistency and choice in equal measure, and it remains one of the most widely supported coil platforms around.

Stock Up and Save

Coils are a consumable, and a five-pack tends to last a few weeks of daily MTL use before flavour starts to drop off. Grabbing two packs at once covers you for well over a month and saves reordering when a coil gunks up.

Every order from Pirate Vapes ships the same day when placed before 4 pm, in plain padded packaging. All stock is age-verified at checkout and sold to over-18s only. Browse more MTL Vape Kits while you are here.

Conclusion

The VooPoo TM coils are the tight-draw end of the PnP platform, packed into one five-coil listing with five resistances to choose from. If you run a Drag, Argus or Vinci pod and vape MTL or restricted with salts or 50/50, one of these will match how you like to draw.

Start with the 0.8ohm R1 if you want a safe MTL pick, or the 0.6ohm TM1 for more warmth and flavour. Find more Vape Accessories or head back to Pirate Vapes for the full coil range.

FAQs

Which VooPoo devices do the TM coils fit?

Any VooPoo pod kit built on the PnP platform, including the Drag, Argus and Vinci pod series plus the Navi. They will not fit TPP or ITO coil devices.

What e-liquid should I use with the TM coils?

50/50 or nic salts. The wicking ports are sized for thinner liquid, so high-VG shortfills risk dry hits at these low wattages.

Which TM coil resistance is best for a tight, cigarette-style draw?

The 1.2ohm PnP-TR1. It is the tightest of the five, with minimal vapour and a discreet pull. The 1.0ohm R2 is close behind.

Are the TM coils mesh?

Some are. The TM1, TM2 and TR1 use a mesh element, while the R1 and R2 are regular wire coils. Mesh gives cleaner flavour and often lasts a little longer.

How long does a TM coil last?

Around a week to ten days with daily use, depending on your liquid. Sweeter, darker liquids gunk the cotton faster and shorten that.

Do I need to prime the TM coils?

Yes. Add a couple of drops onto the cotton and let a filled pod stand for eight to ten minutes before the first vape to avoid a burnt coil.