Voopoo TPP 2 Pod Replacement Tank

Built around four TPP-series mesh coils running from 32W up to 100W, the Voopoo TPP 2 Pod Replacement Tank is the spare or upgrade tank for Voopoo's TPP platform devices, including the Drag X Plus Pro.

Stainless steel and PCTG construction, a 2ml TPD-compliant capacity, and a redesigned 810 drip tip with sealed, condensation-resistant tech make this the updated version of the original TPP tank. 

Bottom adjustable airflow lets you dial in the draw, and full DM1 to DM4 coil compatibility means flavour and cloud output scale to whatever your mod can push. TPD compliant. Over 18s only.

Why vapers choose this:

• Genuine TPP coil compatibility. Runs the full DM1 to DM4 range, so you are not locked into one resistance or one style of draw.

• 810 drip tip with sealed tech. Reduces condensation build-up around the mouthpiece, a common complaint on older sub-ohm tanks.

• Stainless steel and PCTG build. Sturdier than an all-plastic tank, with PCTG keeping weight down.

• Bottom adjustable airflow. Open it up for dense DTL clouds or tighten it for a warmer, more restricted draw.

• A direct replacement, not a compromise. Built specifically for TPP platform devices like the Drag X Plus Pro, so fitment is exact.

Voopoo TPP 2 Pod Replacement Tank Features

Four Coils, One Tank, Real Range

The DM1 sits at 0.15ohm for 60 to 80W. The DM2 runs 0.2ohm at 40 to 60W. The DM3 pushes higher still at 0.15ohm for 80 to 100W, while the DM4 is the half-DL option at 0.3ohm and 32 to 40W. Genuine flexibility from one tank body.

Mesh Coils Built for Speed

Voopoo's TPP-series coils use a dual mesh structure developed through extensive VOOPOO Lab testing. The larger atomisation surface heats faster and more evenly than a standard round coil, giving quicker ramp-up and a consistent hit from the start.

A Drip Tip That Actually Solves a Problem

The removable 810 tip uses a patented sealed fitting to cut down spit-back and condensation pooling, a common complaint on older sub-ohm tanks. It matters more the higher up the wattage range you run.

Side-Fill Access Without the Faff

Refilling is via a side fill point rather than unscrewing the whole top cap. Quicker top-ups, less mess, and no need to remove the Drip Tips to get to it.

Voopoo TPP 2 Pod Replacement Tank Colours

One finish in the current range: Black, a matte, understated look that matches the Drag X Plus Pro and most other TPP platform devices.

How to Fit and Fill the Voopoo TPP 2 Pod Replacement Tank

Quick to swap onto a compatible mod. A couple of minutes, start to finish.

1. Unscrew the base to expose the coil chamber.

2. Fit your chosen TPP-DM coil, pressing it firmly into place until it seats.

3. Reattach the base and screw the tank onto your device's 510 connection.

4. Open the side fill port and add e-liquid, keeping clear of the central airflow tube.

5. Let the coil soak for six to eight minutes before your first draw. Skipping this is the biggest cause of burnt hits on new mesh.

6. Set the airflow and start vaping at the lower end of the coil's wattage range, increasing gradually.

What's in the Voopoo TPP 2 Pod Replacement Tank Box

• Two TPP 2 pod tank bodies, 

• one TPP-DM1 coil, 

• one TPP-DM2 coil, 

• and a user manual. 

No device, no e-liquid, and no coils beyond the two included.

Built for the TPP Platform, Including the Drag X Plus Pro

This tank is designed for Voopoo's TPP Platform devices. The Drag X Plus Pro is confirmed compatible, and TPP coils are shared across other Voopoo mods in the wider TPP range. If your device takes TPP-series coils on a 510 connection, this tank should fit.

It will not fit devices built around PnP or Vinci-format pods, since those platforms use different coil threading entirely. Check your current coil packaging for "TPP" before ordering.

About Voopoo

Voopoo built its reputation on the GENE chipset family and the Drag line of mods, and the TPP coil platform grew from that same push for higher output without sacrificing flavour. VOOPOO Lab's dual mesh coil work sits behind every TPP-DM coil this tank runs, scaling from a gentle 32W half-DL draw to 100W sub-ohm clouds from one tank body.

Stock Up and Save

A spare TPP 2 tank means a cracked panel or worn seal does not put your whole setup out of action. Pick up an extra alongside a pack of DM coils, and you are covered for weeks.

Every order from Pirate Vapes ships the same day before 4 pm, with an age-verified checkout and TPD-compliant stock throughout. Over 18s only.

Conclusion

The TPP 2 is a proper upgrade over the original tank, not just a reskin. Four coil options spanning 32W to 100W, a drip tip that addresses condensation, and side-fill access that keeps refills quick add up to a tank worth having as a spare.

If you run a Drag X Plus Pro or another TPP platform device, this is the correct replacement. Browse more vape tanks and DTL Tanks, or head to Vape Accessories for coils and spares. For everything else, Pirate Vapes has the full range.

FAQs

Which coils fit the Voopoo TPP 2 Pod Tank?

The full TPP-DM range: DM1, DM2, DM3, and DM4. Resistances span 0.15ohm to 0.3ohm, covering 32W to 100W.

Is this a bottom-fill or side-fill tank?

Side fill.

What is the e-liquid capacity?

2ml in the UK TPD version stocked here. An international 4.5ml bubble glass exists as well. 

Does this tank fit my Drag X?

Confirmed compatible with the Drag X Plus Pro. If your device runs TPP-series coils on a standard 510 connection, it should fit.

How long do TPP-DM coils last?

Typically one to two weeks with regular use, depending on wattage and how sweet your e-liquid is.

Can I use nic salts in this tank?

Voopoo recommends 10mg nicotine or below across the TPP-DM range, which suits nic salts as well as lower-strength freebase.