Geekvape Zeus Nano Tank

A sub-ohm tank that actually does both styles properly. The Geekvape Zeus Nano holds 2ml of e-liquid within the UK's TPD limit, runs on Geekvape's B Series mesh coils, and switches between a tight MTL draw and a proper DTL cloud depending on which coil you fit.

Two resistances are included in the box, adjustable top airflow lets you fine-tune either style, and the whole thing fills from the top so refills take seconds rather than minutes. Built with 510 threading, so it drops onto most standard mods without an adapter. Stocked in Gold and Rainbow at Pirate Vapes. Over 18s only.

Why vapers choose this:

• One tank, two vaping styles. Swap the coil and you get MTL or DTL from the same body, no need for two separate tanks.

• Geekvape's B Series mesh coils. Sharper flavour and a longer coil life than the older round-wire coils this replaced.

• Adjustable top airflow. Dial the draw in without hunting for a bottom ring buried under your mod.

• Genuinely quick refills. Top-fill design means you are not stripping the tank down every time the tank runs low.

• 510 threaded. Fits onto the vast majority of standard mods without needing an adapter.

Geekvape Zeus Nano Tank Features

B Series Mesh, Not the Old Round Wire

Geekvape's older tanks ran round-wire coils that heated unevenly and lost flavour quickly. The B Series mesh coils in this tank spread heat across a flat surface instead, which means more consistent vapour and a coil that holds its flavour for longer before it needs changing. Not a small upgrade, honestly, once you have used both back to back.

Two Coils, Two Completely Different Vapes

The included 0.4ohm coil runs at 25 to 33W and is built for denser, warmer DTL clouds. The 0.6ohm sits at 15 to 25W and gives a tighter, cooler pull closer to MTL. Fair enough to want both depending on the mood, and this tank lets you switch between them rather than buying a second device.

Airflow You Can Actually Reach

The adjustable airflow ring sits at the top of the tank rather than tucked away at the base. Quick to reach, quick to adjust mid-vape, and it works whether you are running the tight 0.6ohm setup or opened up for the 0.4ohm.

Top-Fill Without the Faff

Pull the drip tip, tip liquid in through the top port, done. No unscrewing the base, no risk of flooding the airflow slots underneath. If you have used an older bottom-fill Geekvape tank, this is the upgrade you have been waiting for.

Built to Actually Fit Your Mod

510 threading covers most box mods and pod mods on the market. Check our Vape Tanks range if you are shopping for a device to pair it with, since the Zeus Nano is sold as a tank only.

Geekvape Zeus Nano Tank Colours

Two finishes in the store picker, both metallic and vibrant. 

#buttons

• Gold
• Rainbow

How to Set Up the Geekvape Zeus Nano Tank

A few minutes from box to first draw.

1. Unscrew the top cap and remove the pre-installed coil packaging if fitted for transit.

2. Choose your coil. Fit the 0.6ohm for MTL or the 0.4ohm for DTL, and press it firmly into the base until snug.

3. Prime the coil with two to three drops of e-liquid directly onto the visible mesh through the airflow slots.

4. Fill the tank via the top-fill port, stopping just below the max fill line.

5. Let it rest for eight minutes before your first draw, giving the mesh time to fully saturate.

6. Set your airflow to match your coil choice, tighter for the 0.6ohm and more open for the 0.4ohm, then start vaping.

What's in the Geekvape Zeus Nano Tank Box

One Zeus Nano tank body, a 0.4ohm B Series coil, a 0.6ohm B Series coil, a drip tip, a coil removal tool, a spare parts pack, a spare glass tube, and the user manual. No device and no e-liquid included, so you will need both to get started if this is your first Geekvape tank.

Runs on Any 510 Device, MTL or DTL

The Zeus Nano's 510 connection means it fits onto the great majority of box mods and pod mods without an adapter. Whether you pair it with a dedicated MTL device or a higher-wattage mod for DTL clouds depends entirely on which coil you have fitted.

Browse DTL Tanks if cloud production is the priority, or MTL Tanks if you are after that tighter, cigarette-style draw instead. What it will not do is fit proprietary pod systems that use their own snap-in cartridges rather than standard 510 threading.

About Geekvape

Geekvape built its name on rugged, performance-focused hardware, and the Zeus range sits among its most established tank families. The B Series mesh coil platform used here has replaced round-wire coils across most of Geekvape's current tank lineup, chosen for the flavour and longevity gains mesh heating brings over older designs.

The Nano trims the original Zeus down to a smaller, lighter footprint while keeping the same coil ecosystem, which means spares are easy to find and cross-compatible with other B Series tanks in the range.

Stock Up and Save

Mesh coils wear faster than you expect once you are running a tank daily, especially at the higher end of the 0.4ohm's wattage range. Keeping a couple of spare B Series coils in the drawer means you are never caught out mid-week.

Pirate Vapes dispatches every order the same day before 4pm, with age-verified checkout throughout. All stock is TPD compliant and restricted to over 18s only, with Free Pirate Post on orders over £25.

Conclusion

The Geekvape Zeus Nano Tank earns its place by doing two jobs well instead of one job brilliantly. Fit the 0.6ohm for a tighter MTL pull or the 0.4ohm for genuine DTL clouds, adjust the top airflow to match, and refill through the top without any of the usual faff.

Mesh coils, 510 threading, and two colourways that do not look like everyone else's tank. Check our Geekvape Coils range for spares once the included pair wear in, browse vape accessories for everything else your setup needs, and pick one up at Pirate Vapes.

FAQs

Does this tank do MTL or DTL?

Both. Fit the 0.6ohm coil for MTL, or the 0.4ohm for DTL. Same tank, different coil.

What is the actual capacity?

2ml in the UK version, which is the TPD limit. Some international listings show 3.5ml, but UK stock is capped at 2ml.

Will it fit my mod?

Almost certainly. It uses standard 510 threading, which covers the vast majority of box mods and pod mods sold in the UK.

How long do the included coils last?

Typically one to two weeks with daily use, though the 0.4ohm at higher wattage tends to wear faster than the 0.6ohm.

Does it come with spare parts?

Yes. A spare glass tube and a small spare parts pack are included alongside the two coils and coil tool.

Can I buy replacement coils separately?

Yes, Geekvape B Series coils are sold separately once your originals wear out.