SMOK Nord X Replacement Pods

SMOK Nord X Replacement Pods

The SMOK Nord X pods are the refillable cartridges for the Nord X, sold as a pack of 3 in two types. The RPM pod takes the RPM coil range, and the RPM 2 pod takes the RPM 2 range, so you pick the pod to match the coils you run.

Each holds 2ml to meet UK rules, fills from a silicone-stopper port, and clicks on with magnets. Coils are bought separately. Pirate Vapes stocks them among its Replacement Pods alongside the matching SMOK Coils.

Why vapers choose these pods:

• Two pod options support RPM and RPM 2 coils, giving you both MTL and DTL vaping options.

• A pack of 3 keeps fresh cartridges on hand.

• Press-fit coils drop in without any tools.

• A silicone-stopper refill keeps top-ups clean.

• Magnetic fitting clicks on and off in a second.

SMOK Nord X Replacement Pods Features

RPM and RPM 2 Pod Options

The whole choice here is coil family. The RPM pod runs the RPM coil series, which leans towards tighter MTL vaping, while the RPM 2 pod runs the RPM 2 series, which opens up for warmer, cloudier direct lung. They are not interchangeable, so buy the pod that matches the coils you already have or plan to run.

Separate Coil Design

Worth repeating, because it trips people up: these pods arrive empty, with no coil fitted. You add your own RPM or RPM 2 coil, which lets you choose the exact resistance and style you want rather than being stuck with one. Browse the wider refills and pods range to stock up in one go.

Wait, did we mention the coils are separate? Good. Now you will not be caught out.

Easy Press-Fit Coils

Fitting a coil is a push-and-click job. The coil presses into the base of the pod until it seats, with nothing to screw and no tools needed. When it tires, pull it out and press a fresh one in. It is about as simple as coil swapping gets.

Easy Side-Fill Design

Refilling is quick and tidy. Lift the silicone stopper on the side of the pod, sit your bottle in the port, and fill to the line. The stopper seals back down to keep the liquid in, and the pod holds onto the device with magnets so there is nothing to line up.

Match E-Liquid to the Coil

Because you choose the coil, your coil dictates your e-liquid. If you install a sub-ohm mesh coil (like the 0.16ohm RPM 2 or 0.4ohm RPM), you should use thicker high-VG liquid like 70/30 for direct-lung clouds. If you install a higher-resistance coil (like a 1.0ohm or 1.2ohm RPM coil), stick to 50/50 freebase or nic salts for a tighter MTL draw.

SMOK Nord X Pod Type Options

Two pods in the range, and the pick comes down to which coil family you want to run.

The RPM Pod: Takes the classic SMOK RPM coil series. This is a massive coil family that covers everything from the 0.4ohm sub-ohm mesh coil for RDL/DTL vaping, all the way up to 1.2ohm coils for tight MTL nic salt vaping.

The RPM 2 Pod: Takes the newer RPM 2 coil series. These coils generally run at higher wattages and are primarily favoured for warmer, cloudier direct-lung hits with high-VG liquid, though MTL options exist.

#buttons

• The RPM Pod
• The RPM 2 Pod

How to Set Up the Nord X Pods

Fit the coil, fill, then prime.

1. Take the empty pod that matches your coil family (RPM or RPM 2).

2. Prime a fresh coil by dripping three or four drops of e-liquid directly onto its exposed side wicking holes.

3. Press the coil firmly into the base of the pod until it sits flush.

4. Lift the silicone stopper on the side of the pod, fill to the 2ml line, then seal it firmly back up.

5. Click the pod onto the magnetic base of your Nord X device.

6. Stand the device upright for five to ten minutes so the coil soaks completely through. Firing a dry coil will instantly ruin it.

7. Set the wattage on your Nord X to match the coil's recommended rating before you fire, starting low and building up.

What's in the SMOK Nord X Replacement Pods Box

Three empty SMOK Nord X pods in your chosen type, either RPM or RPM 2. There are no coils, no device, and no e-liquid included, so you will need the matching RPM or RPM 2 coil, your Nord X, and a bottle of liquid to get going.

Pods and Coils for the Nord X

These cartridges are made for the SMOK Nord X Pod Kit and nothing else. Keep the pairing right: the RPM pod takes RPM coils, the RPM 2 pod takes RPM 2 coils, and the two families do not swap between pods.

Spare coils sit in our SMOK Range, and if you are after the device itself, you will find it among the Refillable Pod Kits.

About SMOK

SMOK is one of the biggest names in vaping, and the Nord X is its 60W, ruggedly built pod mod that brought two whole coil families under one device.

The RPM and RPM 2 ranges it uses are among the most widely stocked pod coils in the country, spanning tight MTL through to airy direct lung, and there is even an RBA option for vapers who like to rebuild their own. That breadth is the appeal: one device, two pods, and a long list of coils to tune it exactly how you like.

Stock Up and Save

Running both pod types turns the Nord X into two devices in one, an MTL setup on the RPM pod and a direct-lung one on the RPM 2 pod, so keeping both to hand is worth it if you switch styles. Pods wear over time, so a pack of 3 keeps spares ready, and remember to stock the matching coils since they are separate.

Pirate Vapes ships every order the same day when it is placed before 4 pm. All stock is TPD compliant, checkout is age-verified, and sales are strictly over-18s only. Free Pirate Post applies on orders over £40.

Conclusion

If you run a Nord X, these are the pods that keep it going, as long as you match them to your coils. Pick the RPM pod for the RPM range and a tighter MTL draw, or the RPM 2 pod for the RPM 2 range and a warmer direct-lung one, then add your coil and fill.

A pack of 3 keeps you covered for weeks. Browse more Vape Accessories or head back to Pirate Vapes to finish your order.

FAQs

Do SMOK Nord X pods come with coils?

No. They arrive empty with no coil fitted, so you will need to buy the matching RPM or RPM 2 coil separately.

What is the difference between the SMOK Nord X RPM and RPM 2 pod?

The only difference is the coil family they accept. The RPM pod takes the original RPM coil series, while the RPM 2 pod takes the newer RPM 2 series. They are not interchangeable. Both families offer coils for MTL and DTL vaping.

What device do SMOK Nord X pods fit?

Only the SMOK Nord X Pod Kit. The pods are shaped for that device and no other.

How do I fit the SMOK Nord X coil?

It is press-fit. Push the coil into the base of the pod until it seats, with no screwing or tools.

What e-liquid should I use with the SMOK Nord X?

It depends entirely on the coil you install. If you use a sub-ohm mesh coil (like 0.16ohm or 0.4ohm), use high-VG 70/30 liquid. If you use a higher-resistance coil (like 1.0ohm or 1.2ohm), use 50/50 freebase or nic salts.

How long does a SMOK Nord X pod last?

The pod itself lasts a good while with care, though it is the coil inside that wears first. Many vapers get plenty of refills from one pod before it needs replacing.