SMOK Stick AIO Replacement Coils

SMOK Stick AIO Replacement Coils

Two resistances, one job: keep the SMOK Stick AIO and SMOK Priv One Kit running with proper clouds and clean flavour. The SMOK Stick AIO Replacement Coils come five to a pack, built with a Kanthal A1 heating element and organic cotton wicking, and screw directly onto the top cap assembly with no tools needed.

Choose the 0.23ohm dual coil for stronger vapour and a warmer draw, or the 0.6ohm dual coil for a slightly more restrained, flavour-forward pull. Both run comfortably in the 25 to 45W window. Genuine SMOK stock, sold through Pirate Vapes with same-day dispatch.

Why vapers choose this:

• Genuine SMOK stock, not a third-party clone. These are made for the Stick AIO's coil bay specifically, so fitment is never a guessing game.

• Two resistances, one purpose. Pick 0.23ohm for bigger clouds or 0.6ohm for a calmer, more efficient pull.

• Four wicking ports feed the cotton from both sides, which is the main defence against dry hits on a device this compact.

• Fast threaded fit, so replacement takes under a minute with zero mess.

• A five-pack is the right amount for most Stick AIO owners to go a month or two without reordering.

SMOK Stick AIO Replacement Coils Features

Dual Coil Architecture Does the Heavy Lifting

Two coil legs share the heat load instead of one leg doing all the work. Splitting the output like this means more even vaporisation across the wick and less chance of one section scorching before the other catches up. It's a simple engineering choice, but it's the reason these coils feel consistent from the first pull to the last.

Two Resistances for Two Vaping Styles

The 0.23ohm runs hotter and pulls more wattage, which means denser vapour and a bit more throat presence. The 0.6ohm sits lower on the wattage scale and tends to favour flavour clarity over raw cloud output. Neither is objectively better. It depends on what you're chasing on a given day.

Four Wicking Ports, Fed From Both Sides

Bi-directional wicking sounds technical, but it just means the cotton pulls e-liquid in from four separate points rather than one. That matters more than people think. Single-port coils on compact devices are notorious for one side running dry while the rest of the wick still has liquid to give. Here, all four ports work together to keep the whole coil saturated.

Built to Handle High VG

These are not liquid-fussy. Feed them 60% VG or above, and they perform exactly as intended, with steady vapour and no strain on the wick. Push a 50/50 blend through a coil like this, and you're working against the design. Worth pairing with a High-VG E-Liquid if you want the coil to actually earn its keep.

Simple, Quick Replacement

No full tank breakdown or base-plate fiddling required. Unscrew the top cap, twist out the spent coil, and thread the fresh one directly into place. It takes less time than refilling the tank.

SMOK Stick AIO Replacement Coils Resistance Options

Two options, both dual coil, both sitting in the sub-ohm bracket. The choice comes down to how much cloud you want against how much you want the flavour to lead.

#buttons

• 0.23ohm
• 0.6ohm

How to Set Up the SMOK Stick AIO Replacement Coils

Quick swap. Under a minute once you've done it once.

1. Unscrew and remove the top cap of the Stick AIO tank.

2. Unscrew the spent coil from the underside of the top cap assembly.

3. Prime the new coil by adding 2 to 3 drops of e-liquid onto each cotton wicking port and inside the centre chimney.

4. Screw the fresh coil firmly onto the underside of the top cap until snug.

5. Refill the tank, screw the top cap assembly back into the tank, and let it stand upright for 8 to 10 minutes before taking your first puff.

What's in the SMOK Stick AIO Replacement Coils Box

Five replacement coils in your chosen resistance, individually sealed. No tank, no device, no e-liquid included. Just the coils, ready to install into an existing Stick AIO or Priv One kit.

Made for the Stick AIO and Priv One, Not Much Else

These coils are built specifically around SMOK's Stick AIO coil bay. That covers the original SMOK Stick AIO kit and the SMOK Priv One Kit, which shares the same coil platform. If you own either device, this is your genuine replacement.

What they do not fit: devices from SMOK's Nord range, the RPM series, or standard tanks like the TFV series that use bottom-threaded coils. These are designed exclusively for the top-attached chimney system found on the Stick AIO and Priv One. Browse the wider SMOK Range if you're shopping for the kit itself.

About SMOK

SMOK built its reputation on sub-ohm hardware, and the Stick AIO was one of the devices that brought that sub-ohm approach into a genuinely pocketable, all-in-one form factor. Rather than pairing a separate tank with a separate mod, the Stick AIO folded both into one unit, and the coil system had to work within that compact space without sacrificing output.

The dual coil, top-mounted design in these replacement heads is a direct product of that constraint. SMOK also carries the same coil logic across its Priv One kit, which is why the two devices share replacement parts. It's a smaller ecosystem than some of SMOK's newer pod ranges, but it's a reliable one for anyone who already owns the hardware.

Stock Up and Save

A dual coil at 25 to 45W doesn't last forever, especially if you're running it daily. Most Stick AIO owners get through a coil every one to two weeks depending on use, so a five-pack realistically covers a couple of months before you're back here again. Buying ahead means you're never caught out with a dead coil and no spare on hand.

Every order from Pirate Vapes ships same-day before 4 pm, and all stock is TPD compliant with an age-verified checkout. Over 18s only. Free Pirate Post applies on orders over £40.

Conclusion

The SMOK Stick AIO Replacement Coils do exactly what they're meant to: keep an already solid all-in-one kit running the way it did on day one. Two resistances give you a choice between cloud and flavour, the dual coil and four-port wicking keep dry hits to a minimum, and the top-mounted design makes coil changes quick and clean. If you're running a Stick AIO or Priv One and the flavour has started to fade, this is the fix.

Pick up a pack of Vape Accessories alongside it if you're due a refill on the rest of your setup, or browse the full range of Vape Kits if you're thinking about an upgrade. Genuine stock, fast dispatch, from Pirate Vapes.

FAQs

Which devices do the Stick AIO coils fit?

The SMOK Stick AIO and SMOK Priv One Kit. Both use the same top-cap chimney threading, so replacement heads are fully interchangeable between them.

Which resistance should I pick?

0.23ohm for bigger clouds and a warmer draw. 0.6ohm for a cooler, more flavour-focused pull. Neither is wrong.

What e-liquid works best?

High VG, ideally 60% or above. These are sub-ohm coils, and a thinner liquid won't wick properly through them.

How long does a coil last?

Roughly one to two weeks with daily use. Heavier use or sweeter liquids will shorten that.

Can I use nic salts with these coils?

Not recommended. The wattage and airflow are built for DTL freebase vaping, and high-strength nic salt through a sub-ohm coil is a harsh combination.

Do I need to prime the coil before using it?

Yes. A few drops on the exposed cotton and a short soak before your first draw prevents a burnt hit and protects the coil.