Smok TFV16 Replacement Coils

Smok TFV16 Replacement Coils

Built to be pushed hard. These TFV16 mesh coils are rated to run all the way up to 120W, using SMOK's honeycomb hexagonal mesh and organic cotton wicking to turn high wattage into dense vapour and bold flavour. You get a pack of 3, with a choice of single, dual or triple mesh builds so you can match the coil to the draw you want.

They are made for sub-ohm, direct-to-lung vaping on the SMOK TFV16 tank, so if you run yours as a cloud setup on one of your DTL Tanks, these are the heads that keep it firing at full strength.

Why vapers choose this:

• Three builds, one tank switch between single, dual and triple mesh to move from tighter, flavour-led hits to full cloud production without changing your tank.

• Rated to 120W the 0.17ohm and 0.12ohm heads both hit their sweet spot at 120W, so there is real headroom for a powerful mod.

• Honeycomb mesh the hexagonal pattern heats evenly across a large surface for fast ramp-up and consistent taste.

• Organic cotton wicking keeps liquid feeding the mesh to help hold flavour across a tank.

• Pack of three two spares in the drawer before you need to reorder.

Smok TFV16 Replacement Coils Features

Honeycomb Mesh for Better Flavour

The hexagonal mesh pattern spreads heat across a wide, even surface rather than a single thin wire. That means a quicker ramp-up and a fuller, more consistent flavour at high wattage, which is the whole reason the TFV16 became a go-to cloud tank in the first place.

High-Wattage Coil Performance

Plenty. The 0.12ohm dual mesh carries a recommended range of 80W to 160W and hits its best at 120W, while the 0.17ohm single mesh also peaks around 120W. That is proper sub-ohm territory, so you will want a mod with the wattage and battery life to keep up.

Made for High-VG E-Liquid

Coils this low want thick liquid. Pair them with a 70/30 or higher-VG shortfill and the mesh stays properly fed, which protects flavour and coil life. Top up on cloud-friendly juice in the 100ml Shortfills range and add your nic shots to taste.

Easy Press-Fit Replacement

Installation is plug and play. The coil pushes straight into the base of the tank and pulls out the same way, so a swap takes seconds and there are no threads to cross or strip.

Single, Dual and Triple Mesh Options

Single, dual or triple mesh gives you room to fine-tune. Go single for a leaner, flavour-forward hit, dual for the all-round balance most vapers settle on, or triple when you want the biggest vapour the tank can produce.

Smok TFV16 Replacement Coils Resistance Options

Three mesh builds in the range, and the right one comes down to how much power you run and how big a cloud you are chasing.

Most popular is the 0.12ohm dual mesh. Two mesh openings give it strong wicking and a wide 80W to 160W window, with the sweet spot at 120W. It balances flavour and vapour better than the other two, which is why most TFV16 owners land on it. If you are unsure which to start with, pick this one.

The 0.17ohm single mesh is the flavour-led option. A single mesh strip and a slightly higher resistance make it the leanest of the three, best around 120W for clean, accurate taste without the very biggest clouds.

The 0.15ohm triple mesh is the cloud-maker. Three mesh openings widen the heated area for the fastest ramp-up and the largest vapour, best used at around 90W.

#buttons

• Dual Mesh 0.12
• Single Mesh 0.15
• Triple Mesh 0.20

How to Set Up the Smok TFV16 Replacement Coils

Quick swap. Under two minutes.

1. Empty the tank and remove the old coil from the base. It sits on a press-fit connection, so it pulls straight out.

2. Drip four to five drops of e-liquid into the wicking ports and onto the exposed cotton of the fresh coil to pre-soak it.

3. Press the new coil firmly into the base of the tank until it seats fully and sits flush.

4. Refill the tank with a high-VG shortfill, ideally 70/30 or thicker.

5. Stand the tank upright and leave it for a full fifteen minutes so the cotton fully saturates. Big coils hold more cotton, so give them the extra time.

6. Start low and build up, taking a few gentle puffs at reduced wattage before climbing toward the coil's recommended range.

What's in the Smok TFV16 Replacement Coils Box

Each pack contains three SMOK TFV16 mesh coils in your selected resistance. That is the full contents. There is no tank, no e-liquid and no device included, so you will need your existing TFV16 setup and a bottle of high-VG juice to get going.

The DTL Coil for SMOK's TFV16 Tank

These coils are made for the SMOK TFV16 Sub-Ohm Tank and share the same platform as the TFV18 coil series, so the two are cross-compatible. They will not fit SMOK's earlier tanks such as the TFV12 or TFV8, which use their own separate coil families.

If your device came with the TFV16 tank, this is the correct replacement head for it. Explore the full SMOK Coils collection for other heads across the range.

About SMOK

SMOK built its reputation on high-output sub-ohm hardware, and the TFV series is the line that made the name. The TFV16 pushed the mesh idea further with an oversized honeycomb heating area designed to run at genuine cloud-chasing wattages while keeping flavour clean.

These replacement coils keep that performance intact, and because they run so much power, they pair naturally with a capable regulated mod. Match yours to a suitable device from the Box Mods range for the full effect.

Stock Up and Save

Sub-ohm coils get used up quickly at high wattage, so it pays to keep spares on hand. Pirate Vapes dispatches same-day on orders placed before 4pm, and Free Pirate Post applies once your basket passes £40.

Every order is age-verified at checkout and sold to over-18s only. Grab a couple of packs together and you are covered for weeks of daily cloud chasing without a mid-session scramble.

Conclusion

The SMOK TFV16 mesh coils are the straightforward way to keep a TFV16 tank running at full power, with a 0.12ohm dual mesh for all-round balance, a 0.17ohm single mesh for leaner flavour and a 0.15ohm triple mesh for the biggest clouds.

Honeycomb mesh, organic cotton wicking and a press-fit swap make them simple to live with, and a pack of three keeps spares close. If your clouds have thinned out or the flavour has gone flat, this is the fix. Pick up matching heads and spares in the Vape Accessories range at Pirate Vapes.

FAQs

Which tank do TFV16 Replacement Coils fit?

The SMOK TFV16 Sub-Ohm Tank. They also share a platform with the TFV18 coil series, so the two are cross-compatible.

What wattage should I run the TFV16 Replacement Coils?

Depends on the coil. The 0.17ohm and 0.12ohm peak around 120W, while the 0.15ohm triple mesh is best near 90W.

What e-liquid works best with TFV16 Replacement Coils?

High-VG shortfills at 70/30 or thicker. Thin 50/50 juice will struggle to keep these low-resistance coils wicked and can lead to dry hits.

How many TFV16 Replacement Coils are in a pack?

Each pack contains three coils in your chosen resistance.

Will TFV16 Replacement Coils fit my older SMOK tank?

No. They will not fit the TFV12, TFV8 or other earlier SMOK tanks, which each use their own coil families.

How long does a TFV16 Replacement Coil last?

It varies with wattage, juice and how hard you push it. Darker and sweeter liquids clog mesh faster, so a lighter fruit blend will generally stretch further than a thick dessert.