Vaporesso Armour Ultra Vape Kit

Vaporesso Armour Ultra Vape Kit

A 5500mAh built-in battery in a 100W sub-ohm mod that shrugs off water, dust and 1.2-metre drops. That is the Vaporesso Armour Ultra in one line. Built for DTL vapers who want big flavour, dense clouds and a device that survives a builder's belt, a beach bag or a dropped mic moment.

The kit pairs the Armour Ultra mod with the iTank T 2ml tank and Vaporesso's new GTi Dual Mesh coils, running off USB-C fast charging. If you have been eyeing more rugged Vape Kits that actually earn the label, this is one of the few that does.

Why vapers choose this:

• Genuinely all-day battery. 5500mAh means fewer top-ups, longer trips, and one less thing to worry about in the middle of a shift.

• Certified rugged. IP68 dust and water rating, IP69K high-pressure resistance, MIL-STD-810H drop-tested to 1.2m.

• Dual Mesh flavour. GTi Dual Mesh coils extend coil lifespan by up to 30% and lift flavour clarity at 55W to 65W.

• UK-legal 2ml tank. iTank T ships in the TPD 2ml format, top-fill and leak-resistant.

• Boost Mode punch. Faster first-puff ramp than Pulse or Eco, useful for cold mornings.

Vaporesso Armour Ultra Kit Features

5500mAh Built-In Battery

Vaporesso squeezed roughly the capacity of two 18650 cells into a built-in package that is still 25% smaller than the Armour S. For DTL vaping, that translates to two full days of moderate use before the USB-C Charging Cable comes out. 9V/2A fast charge tops it back up quickly when it does.

Triple-Certified Durability (IP68, IP69K & MIL-STD-810H)

The Armour Ultra mod carries three of the toughest durability ratings available on any vape device. It features IP68 water immersion resistance (1m for 30+ minutes), IP69K high-pressure jet resistance, and MIL-STD-810H drop protection up to 1.2 metres. A rubberised USB-C port seal, reinforced buttons, and a metal cage frame keep the internal electronics safe on job sites or outdoor trips.

GTi Dual Mesh Coil Technology

The Vaporesso Armour Ultra 100W kit debuts Vaporesso's GTi Dual Mesh platform. Two mesh layers heat e-liquid more evenly, which stretches coil life by around 30% and holds flavour consistency for longer. It also plays nicely with existing GTi mesh coils, so replacements are widely stocked in our Vaporesso Coils range.

iTank T With Widened Top Airflow

The 2ml iTank T uses top airflow, calibrated with an adjustment scale rather than a vague ring. It slides open one-handed for top-fill refills. Airflow is wide, quiet and comfortable at 50W to 75W depending on which coil you choose. It sits well alongside other DTL Tanks in the same class, but the refill mechanism is genuinely better than most.

Versatile AXON Chipset Modes

Powered by the AXON chip, the Armour Ultra offers four distinct vaping modes: Boost, Pulse, Eco, and TC. Boost Mode delivers 25% more stability than Pulse Mode for an instant, punchy first hit. Eco Mode conserves battery life for long days out, while TC Mode accommodates custom temperature control builds.

Vaporesso Armour Ultra Kit Colours

Seven finishes stocked in the picker, matte and metallic textures across the range.

#buttons

• Camo Silver
• Dune Gold
• Emerald Green
• Light Pink
• Obsidian Black
• Storm Blue
• Titanium Silver

How to Set Up the Vaporesso Armour Ultra

Under three minutes, tank to first puff.

1. Unbox and inspect. Slide the tank off the 510 connector and check that the pre-installed GTi 0.2Ω Dual Mesh coil is seated.

2. Prime the coil. Drip 6 to 8 drops of e-liquid directly onto the exposed cotton wicking ports. This prevents a dry first puff.

3. Reattach the tank and slide open the top cap in one motion.

4. Fill with a high-VG shortfill, 70/30 or similar, up to the 2ml mark. Close the cap.

5. Stand the kit upright and let the coil soak for 7 minutes before firing. Enough for the mesh to saturate fully.

6. Start at 55W and step up to your sweet spot. The 0.2Ω coil sings around 65W.

What's in the Vaporesso Armour Ultra Box

Each kit ships with the Armour Ultra mod, the iTank T 2ml tank, one pre-installed GTi 0.2Ω Dual Mesh coil, one spare GTi 0.4Ω Dual Mesh coil, a USB-C charging cable, a refilling silicone plug, two spare O-rings, an extra glass tube, an extra tank protector, and the user manual with warranty card. No e-liquid, no batteries to buy separately, no charger plug head.

Made for Every Coil in the Vaporesso GTi Platform

The iTank T is compatible with the entire Vaporesso GTi coil family. That includes the new GTi 0.2Ω Dual Mesh (best at 65W), GTi 0.4Ω Dual Mesh (best at 55W), GTi 0.15Ω Dual Mesh (best at 85W), and all original standard GTi mesh coils (0.15Ω, 0.2Ω, 0.4Ω, and 0.5Ω).

Note that smaller pod-style coils like the GTX platform will not fit. The mod also uses a standard 510 connection, allowing you to run any compatible sub-ohm tank. Browse the wider Vaporesso Coils range for stock.

About Vaporesso

Vaporesso stands at the top of sub-ohm hardware design, well known for premium build quality and the responsive AXON chipset. The Armour line specifically is Vaporesso's rugged workhorse family: Armour S, Armour Max, Armour GS, and now the Armour Ultra as the flagship.

Where the Armour S targeted commuters and the Armour Max chased pure output, the Armour Ultra pushes battery endurance and durability certification further than either. It is the range you buy when you want a mod that lasts through more than one contract cycle.

Stock Up and Save

The Armour Ultra is a keep-forever mod, but coils are the running cost. A five-pack of GTi Dual Mesh coils lasts most vapers six to ten weeks. Pirate Vapes ships every order with age-verified checkout and TPD-compliant stock as standard, over-18s only, no exceptions.

Same-day dispatch runs on orders placed before 4 pm, and Free Pirate Post kicks in on baskets over £40 . Stack coils, a spare glass tube and your favourite 70-30 Shortfills in one order, and you are set for months.

Conclusion

The Vaporesso Armour Ultra 100W Kit is the current benchmark for rugged, high-endurance sub-ohm DTL vaping in the UK. The 5500mAh battery, GTi Dual Mesh coils, and triple certification (IP68, IP69K, MIL-STD-810H) put it in a category almost by itself.

Pair it with a High VG E-Liquid and a couple of Nicotine Shots to build your preferred strength, or drop it into a rotation with other Box Mods already on your shelf. In stock and shipping from Pirate Vapes today.

FAQs

Is the Vaporesso Armour Ultra a sub-ohm kit?

Yes. The Armour Ultra ships with the GTi 0.2Ω Dual Mesh coil pre-installed and a 0.4Ω spare, both well below 1Ω. It is a DTL sub-ohm kit designed for high-VG shortfills, not nic salts or MTL vaping.

How long does the 5500mAh battery last?

For most DTL users at 55W to 65W, expect two to three days of real-world use per charge. Heavier cloud-chasing at 75W will pull that back to a day and a half. USB-C fast charging at 9V/2A gets you back up to full in around 90 minutes.

Can I use nic salts in the Armour Ultra?

Not recommended. Sub-ohm coils vaporise far more e-liquid per puff, so 20mg nic salts would deliver an unpleasant nicotine hit. Stick to 3mg or 6mg high-VG shortfills, or DIY with nicotine shots at low strength.

Is the Vaporesso Armour Ultra 100W kit really waterproof?

The mod itself is IP68 rated, meaning 1m submersion for up to 30 minutes, plus IP69K for high-pressure water jets. The tank and coil are not covered by those ratings, so full submersion with e-liquid inside is a bad idea. Splashes, rain and sweat are genuinely no problem.

Which coils fit the iTank T?

Any coil from Vaporesso's GTi platform: the new 0.2Ω and 0.4Ω Dual Mesh coils, plus older 0.15Ω, 0.2Ω, 0.4Ω and 0.5Ω single-mesh GTi coils. Smaller pod-style coils like the GTX series will not fit.

Is the Vaporesso Armour Ultra Kit UK legal?

Yes. The tank ships in the UK 2ml TPD configuration, and Pirate Vapes only stocks TPD-compliant Vaporesso hardware. Age-verified checkout applies at basket, over-18s only.