Vaporesso Eco Nano Pod Vape Kit

Vaporesso Eco Nano Pod Vape Kit

The 1000mAh battery is fitted in a device that measures 77mm. The in-built 0.8ohm mesh pod holds 2ml of liquid according to the TPD rules. There is a COREX heating system in place, and every pod will feature the Morph-Mesh coil structure which, according to the company, will give you around 13,000 puffs before the mesh deteriorates. T

hree pod resistances are available separately, so the Eco Nano Kit covers both tight mouth-to-lung and a slightly looser draw depending on which pod you fit. A straightforward Refillable Pod Kit for vapers who want to draw and go.

Why vapers choose this:

• Pure auto-draw activation with no fire button or power adjustment. Draw, and it fires.

• COREX heating with Morph-Mesh coils for consistent flavour across the life of each pod.

• 1000mAh battery in a device that fits comfortably in a closed hand.

• Three pod resistances available so you can match the draw to your preference.

• Bottom-fill design keeps the mouthpiece clean during refills.

Vaporesso Eco Nano Features

COREX Mesh Heating

The Eco Nano Vape Kit uses Vaporesso's COREX heating system paired with a Morph-Mesh coil structure inside each pod. The mesh pattern heats e-liquid evenly across the coil surface, maintaining flavour from the first fill to the last. Vaporesso rates each pod at around 13,000 puffs before degradation, though real-world results depend on draw duration and e-liquid sweetness.

Auto-Draw Activation

There is no fire button on the Eco Nano. You inhale and the device fires. You stop, and it cuts. A discreet base LED breathes during draws and flashes when battery power runs out.

1000mAh Battery & USB-C

The 1000mAh cell charges through a USB-C port at 1A. No charging cable is included in the box, so you will need your own USB-C cable. The port sits at the base of the device.

Bottom-Fill Pods

Each 2ml TPD pod fills from the bottom. Remove the pod from the device, flip it, pull the silicone stopper and fill through the port. Press the stopper flush, flip back and reseat. The mouthpiece stays dry throughout.

Compact Pocket-Friendly Build

At 44.7 x 18 x 77mm, the Vaporesso Eco Nano Kit is one of the smaller refillable pods available. The flat sides sit between two fingers, and the device disappears into a trouser pocket without bulk.

Vaporesso Eco Nano Colours

The Eco Nano Pod Vape Kit is available in 19 colourways. All share the same internal hardware. Available finishes at Pirate Vapes include:

#buttons

• Azure Gem

• Black Truffle

• Colorflow

• Creamy Purple

• Foggy Blue

• Ivory White

• Lumina

• Midnight Black

• Nebula

• Peach Pink

• Phantom Blue

• Sakura Pink

• Sparkling Purple

• Spring Green

• Summer Yellow

• Sunrise Orange

• Sunset Gold

• Tropics Orange

• Universal Grey

How to Set Up the Vaporesso Eco Nano

First use takes under two minutes. No cable is needed for initial setup, only for charging later.

1. Remove the pod from the device by pulling it upward from the magnetic connection.

2. Flip the pod and pull open the bottom-fill silicone stopper.

3. Fill with your chosen E-Liquid. Leave a small gap at the top of the fill port. Reseal the stopper firmly.

4. Reseat the pod into the device with the mouthpiece facing up. The magnets pull it into place.

5. Allow the pod to stand upright for 5 minutes. This ensures the COREX cotton saturates fully to prevent dry hits.

6. Draw on the mouthpiece. The device fires automatically. No button press or power-on sequence is needed.

What's in the Eco Nano Box

• 1x Vaporesso Eco Nano Device

• 1x 0.8ohm Eco Nano Pod (2ml, pre-installed)

• 1x User Manual

No USB-C cable is included. No spare pod is included. You will need a USB-C cable for charging and may want a spare Replacement Pod from the start.

Which Pods Fit the Vaporesso Eco Nano?

The Eco Nano uses Vaporesso's Eco Nano integrated-coil pods. These are not interchangeable with XROS pods, GTX coils, Luxe pods or any other Vaporesso system. Only Eco Nano pods fit. Pirate Vapes stocks Eco Nano pods in three resistances:

• 0.6ohm mesh: slightly looser draw for a restricted direct-lung style.

• 0.8ohm mesh: the standard pod included with the kit, balanced for mouth-to-lung.

• 1.2ohm mesh: tighter draw with lower vapour output, suited to higher-strength Nic Salts.

All pods are available in 2ml TPD capacity. The integrated coil means you replace the entire pod when flavour fades.

Not compatible with: XROS pods, XROS Nano pods, GTX coils, Luxe Q/QS pods, Target pods, or any pod system outside the Eco Nano range.

About Vaporesso

Vaporesso has built a wide range of pod kits and mod kits across several product families, including the XROS, Luxe and Target lines. The Eco series sits at the simple end of that range, stripping back screens, buttons and power controls in favour of pure draw-activated operation.

The COREX heating platform, shared across current Eco devices, is Vaporesso's latest coil technology. Pirate Vapes carries the full Vaporesso Vapes range, including kits, pods and Vape Accessories.

Stock Up and Save

One pod ships with the Eco Nano Kit, and no cable is in the box, so ordering a spare pod and a USB-C cable alongside the kit saves a second delivery. Pirate Vapes stocks Eco Nano pods in 0.6ohm, 0.8ohm and 1.2ohm.

Orders over £40 qualify for Free Pirate Post, with same-day dispatch on orders placed before 4 pm. TPD compliant, age-verified checkout, over-18s only.

Conclusion

The Vaporesso Eco Nano Pod Kit puts COREX mesh heating and a 1000mAh battery into a 77mm body with no buttons and no screen.

Auto-draw fires when you inhale, three pod resistances cover MTL to restricted DTL, and the bottom-fill design keeps refills clean. Browse compatible pods and Vape Kits at Pirate Vapes.

FAQs

Does the Vaporesso Eco Nano have a fire button?

No. The Eco Nano is entirely draw-activated. You inhale to fire, and there is no button or manual power setting.

Is a USB-C cable included with the Eco Nano Kit?

No. The box contains the device, one 0.8ohm pod and a user manual. You will need to supply your own USB-C cable for charging.

What coil resistances are available for the Eco Nano?

The kit includes a 0.8ohm mesh pod. Replacement pods are available in 0.6ohm, 0.8 ohm, and 1.2ohm resistances, all with integrated mesh coils.

Can I use XROS pods in the Vaporesso Eco Nano?

No. The Eco Nano Kit uses its own pod system. XROS, Luxe, GTX and other Vaporesso pods are not compatible.

What e-liquids work best with the Eco Nano Pod Kit?

10mg or 20mg nic salts in a 50/50 PG/VG ratio suit the included 0.8ohm pod well. The 1.2ohm pod works best with higher-strength nic salts for a tighter MTL draw. The 0.6ohm pod can handle slightly higher VG blends at lower nicotine.

How long does the Eco Nano battery last?

The 1000mAh battery lasts most of a day at moderate use. Charging at 1A over USB-C brings it back to full reasonably quickly.