Vaporesso Target PM80 Replacement Pods

Vaporesso Target PM80 Replacement Pods

Sub-ohm clouds from a pod you can actually see through. The Target PM80 pod is the clear, refillable cartridge for Vaporesso's Target PM80 sub-ohm pod mod, and it runs the full GTX coil family (coils sold separately).

It fills from the bottom through a silicone-stopped port, seats with a magnetic click, and comes as a pack of two. UK pods hold 2ml, with a larger 4ml size also stocked. If your GTX coil has tired out or your old pod has gone cloudy, these are the Replacement Pods you want.

Why vapers choose this:

• See-through body so you always know your liquid level, which the older opaque pods never let you do.

• Runs the whole GTX coil family rather than one locked resistance, so the same pod does big DTL clouds or a tighter draw.

• Bottom fill under a silicone stopper keeps refills quick and leaks down.

• Two pods per pack, so you have a spare ready the moment one clouds up.

• 2ml UK size or the larger 4ml, whichever suits how often you want to refill.

Vaporesso Target PM80 Replacement Pod Features

Clear Pod, No Guessing

The pod is fully transparent, so a glance tells you how much liquid is left. That sounds minor until you have run a coil dry on an opaque pod and cooked it. With this one, you watch the level drop and top up before the wick starves. Small design choice, real benefit.

Which GTX Coil Should Go In?

Whichever suits your draw. The pod takes the entire Vaporesso GTX Coils family, so a 0.2ohm mesh at 45-60W throws big DTL clouds, while a 0.6ohm or 0.8ohm pulls the wattage back for a warmer, restricted draw. One pod, a whole spread of vaping styles.

Bottom Fill, Coils Plug Straight In

Filling happens underneath, through a silicone-stopped port, so there is no cap to unscrew up top. Coils press into the base plug-and-play style, no threading. Vaporesso's own tip is worth following: line the coil up square to the base so it seats flush, and leaks stay rare.

Built for Sub-Ohm, Ready for Shortfills

At its most popular resistances, this is a sub-ohm DTL pod, which means it wants thicker juice. Pair it with High-VG E-Liquid or a shortfill topped with a nic shot. Thin 50/50 works fine on higher-resistance coils, but the real clouds come from the high-VG stuff.

Comfortable to Draw On

The pod finishes in an ergonomic conical mouthpiece, shaped for a comfortable DTL draw rather than a hard plastic lip. Slot it onto the PM80 and the AXON chip reads whichever GTX coil you fitted, setting the output range on its own. You fill and vape. The device sorts the wattage.

Vaporesso Target PM80 Replacement Pod Sizes

Two sizes on the shelf, the same pod in every other respect.

The 2ml (Small) is the UK TPD-standard pod and the one most people want. UK law caps nicotine e-liquid in a pod at 2ml, so this is the compliant everyday choice.

The 4ml (Large) holds double, for fewer refills between top-ups. It suits zero-nicotine or shortfill use where the bigger reservoir is handy.

#buttons

• 2ml (Small)
• 4ml (Large)

How to Set Up the Vaporesso Target PM80 Replacement Pod

A few minutes, mostly waiting on the wick.

1. Take a fresh GTX coil and press it into the base of the pod, keeping it square so it seats flush.

2. Drip a few drops of e-liquid straight onto the exposed mesh through the base, so it is not going in bone dry.

3. Fill the pod from the bottom through the silicone port, then push the stopper firmly back in.

4. Stand the filled pod upright for a full ten minutes. Sub-ohm mesh soaks slower than you expect, and a dry first fire ruins a coil.

5. Seat the pod on the PM80. The magnets pull it into place, and the chip picks up the coil.

6. Start a little below the coil's rated wattage, then work up to taste.

What's in the Vaporesso Target PM80 Replacement Pod Box

Two empty Target PM80 pods in your chosen size. No coils, and no e-liquid. You add a GTX coil and your own juice, which is the whole point of a refillable: you pick the resistance and the flavour. Every pack from Pirate Vapes is genuine Vaporesso, not a clone.

Made for the Target PM80 and the GTX Coil Platform

These pods are built for the Vaporesso Target PM80 sub-ohm pod mod. The GTX coil platform they run is shared across a long line of Vaporesso devices, from the LUXE 80 kits to the GTX GO series, which is why GTX coils are easy to find and cheap to restock. Dropping a fresh pod into a Refillable Pod Kit like the PM80 takes a second thanks to the magnetic base.

What they are not is universal. This is a Target PM80 pod, so it will not slot into an XROS, a Luxe X, or a rival brand's device. Some listings also cover the PM80 SE and the PM30, so check your exact model before you buy.

About Vaporesso

Vaporesso's GTX coil platform is one of the widest in vaping. A single mesh coil family spans dozens of the brand's devices, from sub-ohm pod mods like the Target PM80 to compact pens and tanks. That breadth is deliberate. It means a vaper can move between Vaporesso kits without relearning coils or hunting down obscure spares.

The Target PM80 helped popularise the affordable sub-ohm pod mod, and this pod is the genuine cartridge that keeps one running. Explore the rest of the Vaporesso Range.

Stock Up and Save

A pod is only half a setup. To vape, you also need a GTX coil, and for sub-ohm you want a high-VG juice, so it is worth grabbing all three in one go rather than three separate orders. Sub-ohm coils and big clouds get through pods over time, so a fresh two-pack in the drawer is sensible.

Every order from Pirate Vapes ships same day when it is placed before 4 pm, boxed so the pods arrive uncracked. Checkout is age-verified; over 18s only. Free Pirate Post over £40.

Conclusion

For Target PM80 owners, these clear two-pack pods are the simple way to keep the kit fresh: see-through so you never dry-burn a coil, bottom-filling for tidy refills, and open to the whole GTX coil range.

Choose the 2ml for UK TPD use or the 4ml for fewer top-ups, add a coil, and you are away. Stock up on more refills and pods, browse the Vape Accessories for the rest, and restock at Pirate Vapes.

FAQs

What device are Target PM80 pods for?

The Vaporesso Target PM80 sub-ohm pod mod. Some listings also cover the PM80 SE and PM30, so check your exact model first.

Do Target PM80 pods come with coils?

No. The pods are empty. You fit a Vaporesso GTX coil separately and choose the resistance.

What is the difference between the Target PM80 pods 2ml and 4ml?

Capacity only. The 2ml is the UK TPD size for nicotine liquid. The 4ml holds double for fewer refills.

Which e-liquid suits Target PM80 pods?

For sub-ohm coils, thick high-VG juice or a shortfill. Higher-resistance GTX coils handle 50/50 better.

Do the Target PM80 pods leak?

Rarely, as long as the coil is seated square and the bottom stopper is pushed fully home. A loose coil is the usual culprit.

How many Target PM80 pods come in a pack?

Two.