Vaporesso Cascade GTM Coils | Pack Of 3

Vaporesso Cascade GTM Coils

Two resistances, one job: dense sub-ohm clouds from the full-size Cascade tank. The Vaporesso Cascade GTM coils are the press-fit atomiser heads made for Vaporesso's original Cascade Sub-Ohm Tank, sold three to a pack. The GTM2 sits at 0.4ohm and runs 40 to 80W.

The GTM8 drops to 0.15ohm and climbs all the way to 200W. Both push in without any threading, both wick through organic cotton, and both are firmly DTL coils. Pair them with high-VG juice and a mod that can actually deliver the power. Among the steadier Vaporesso Coils for anyone still running a Cascade.

Why vapers choose this:

• The threadless fit is the headline. You pull the old core out and push the new one in, no unscrewing, no greasy threads, no fighting a hot coil after a session. Whole swap takes seconds once the tank is drained.

• Two power bands from one pack family. The 0.4ohm for balanced day-to-day sub-ohm, the 0.15ohm when you want maximum vapour.

• Organic cotton wicking keeps saturation even and pushes back against dry hits at higher wattage.

• Genuine Vaporesso cores, so the flavour and cloud match what the Cascade was tuned to deliver.

• Sold in threes, which is the sensible way to buy sub-ohm coils since heavier wattage burns through them faster than any High-VG E-Liquids budget expects.

Vaporesso Cascade GTM Coils Features

Plug-and-Pull Beats Threading Every Time

The GTM cores skip the screw-in step entirely. The head press-fits into the base, held by the tank's internal seating rather than a thread. That means no cross-threading, no coil seized in place, and no burnt fingers. Drop the old one out, seat the fresh one, done. Small mechanism, genuinely less hassle.

How Much Power Do You Actually Have?

This is the question to answer before buying. The GTM8 at 0.15ohm wants 80W and up, peaking around 200W, which only a serious dual-battery mod will feed properly. The GTM2 at 0.4ohm is happier between 40 and 80W. Buy the coil your mod can support, not the other way round.

Built for Clouds, Not Pockets

These are unapologetic DTL coils. Big airflow, big vapour, warm draw. If you want the discreet, tight, cigarette-style pull, you are on the wrong page. The Cascade platform sits in proper Sub-Ohm DTL Tanks territory, so treat it as a cloud setup and it rewards you.

Cotton That Keeps Up

Organic cotton wicking sits behind the coil, feeding liquid fast enough to match the heat at these wattages. That matters more than it sounds. Under-wicking at 150W gives you a dry, harsh hit within seconds, so the wicking is doing quiet, constant work every draw.

Match the Juice to the Coil

At sub-ohm resistances, thin high-PG liquid and strong nicotine are a bad match. Go high-VG, 70/30 or thicker, and keep nicotine low. It wicks better, it clouds better, and it stops the throat hit turning brutal. This is standard sub-ohm practice, worth stating plainly.

Vaporesso Cascade GTM Coils Resistance Options

Two heads in the range, and the right one comes down to how much power your mod puts out. Fair warning: both sit well inside sub-ohm territory, so a Regulated Box Mod is essential.

Most popular: the GTM2 0.4ohm. It runs a 40 to 80W window that most sub-ohm mods reach without straining, and it strikes a decent balance between flavour, cloud, and coil life. If you are not chasing the absolute biggest clouds and just want reliable everyday DTL from the Cascade, start here.

For high wattage: the GTM8 0.15ohm. Rated 80 to 200W, this is the cloud-chaser option. It produces the densest vapour of the two, but it drinks juice and battery fast, and it needs a dual-battery mod to run safely near the top of its range. Only worth it if your device and habits genuinely call for that power.

#buttons

• GTM2 (0.4ohm)
• GTM8 (0.15ohm)

How to Fit the Vaporesso Cascade GTM Coils

Quick, threadless, a couple of minutes at most.

1. Empty the tank first, then unscrew the base and pull the spent core straight out of the seating. It is a firm tug, not a twist.

2. Drip four or five drops of high-VG e-liquid onto the exposed cotton ports around the new coil, plus a drop down the centre.

3. Push the fresh core firmly into the base until it clicks home and seats flush.

4. Reassemble the tank and fill with your high-VG liquid, letting it settle around the coil.

5. Leave it to drink for a good ten minutes so the cotton is fully saturated before you fire it.

6. Start low, around the bottom of the range, and build the wattage up gradually until the flavour peaks.

What's in the Vaporesso Cascade GTM Coils Box

Three coils in your chosen resistance, either the 0.4ohm GTM2 or the 0.15ohm GTM8, each individually sealed. That is everything. No tank, no mod, no e-liquid, so you will need your own Cascade setup and a bottle of high-VG juice to get going.

The Coil That Fits the Full-Size Cascade

The GTM cores were made for one tank: the original full-size Vaporesso Cascade Sub-Ohm Tank. Nothing else in the range takes them without an adapter, and the smaller tanks do not take them at all. Browse compatible Vape Tanks if you are building a fresh setup around them.

What they do not fit is the smaller Cascade family. Not the Cascade Baby. Not the Cascade Mini. Not the Cascade One. Those tanks run Vaporesso's GT Cores instead, which are a different size and platform. Check the coil currently in your tank before you order.

About Vaporesso

Vaporesso built the Cascade around a coil idea that was ahead of its time: drop the threading and let the atomiser press straight into the base. The GTM cores were the tank's dedicated heads, tuned specifically for its airflow and juice flow rather than borrowed from another device.

That plug-and-pull approach later spread across much of Vaporesso's line, but the Cascade is where it earned its reputation for dense, consistent sub-ohm clouds. See the wider Vaporesso Range for the tanks and kits these coils were designed to serve.

Stock Up and Save

The Cascade is an older tank now, but plenty are still going strong, and a genuine set of GTM cores is the cheapest way to keep one running rather than replacing the whole tank. Sub-ohm coils wear faster than most, especially at 150W-plus, so a three-pack rarely feels like too many.

Every order from Pirate Vapes goes out in padded packaging with same-day dispatch on orders placed before 4pm. All stock is TPD compliant, checkout is age-verified, and it is over-18s only. Free Pirate Post lands on orders over £25.

Conclusion

If you own a full-size Vaporesso Cascade and it still performs, the GTM cores are the straightforward way to keep the flavour and clouds fresh. The 0.4ohm GTM2 suits most sub-ohm mods, the 0.15ohm GTM8 is for high-wattage cloud chasers, and both press in without a single thread.

Just make sure your mod has the power and your juice is high-VG. Browse more Vape Accessories and the full lineup at Pirate Vapes.

FAQs

Which tank do the GTM cores fit?

Only the full-size Vaporesso Cascade Sub-Ohm Tank. They will not fit the Cascade Baby, Mini, or One, which use GT Cores.

What's the difference between the GTM2 and GTM8?

Power. The GTM2 is 0.4ohm for 40 to 80W. The GTM8 is 0.15ohm for 80 to 200W and much bigger clouds.

Do I need a special mod?

Yes. These are sub-ohm coils, so they need a regulated box mod that can safely fire below 1 ohm. The 0.15ohm in particular really wants a dual-battery device.

What e-liquid works best?

High-VG, 70/30 or thicker, at low nicotine. Thin high-PG juice and strong nic salts do not suit sub-ohm coils and will taste harsh.

How long does a coil last?

Depends on your wattage and juice. Heavier power and darker, sweeter liquids shorten a coil's life. Many sub-ohm vapers change one every week or so, which is why they come in threes.

Can I use GT Cores in the same tank?

The full-size Cascade can take GT Cores with the correct adapter. Straight GTM replacements need no adapter at all.