Vaporesso GTR Vape Coils

Vaporesso GTR Vape Coils

Three mesh coils per pack, in two sub-ohm resistances built for direct-to-lung vapour. The Vaporesso GTR Coils come in 0.15 ohm and 0.4 ohm options, both using a mesh heating element and a push-fit fitting that drops straight into your tank with no tools and no threading.

Each coil wicks through antibacterial cotton inside a leak-resistant housing, so flavour stays clean, and your tank stays tidy. Built exclusively for the Vaporesso FORZ Tank 25, they are made for High VG E-Liquids and warmer sub-ohm vaping. Grab a set from the Vaporesso Coils range and keep your kit firing.

Why vapers choose this:

• Two sub-ohm resistances in one range means you can run warmer, tighter clouds on the 0.4 ohm or push bigger, airier DTL vapour on the 0.15 ohm without changing any hardware.

• Mesh heating spreads current across a wider surface for sharper flavour and a quicker ramp-up.

• Push-fit swaps take seconds: pull, press, vape.

• Antibacterial cotton keeps every fill tasting clean.

• Three per pack means fewer reorders and a spare always in the drawer.

Vaporesso GTR Coils Features

Mesh for Better Flavour

The mesh element heats evenly across its whole surface rather than in one hot spot, which is why sub-ohm mesh coils tend to taste crisper and ramp up faster than older wire builds. For high VG e-liquids, that translates to warm, dense vapour and a flavour that holds its shape from the first pull to the last.

Easy Push-Fit Replacement

Because it saves you the fuss. There is no thread to line up and nothing to unscrew. You press the coil into the tank base until it clicks into position, and you are done. It keeps swaps quick, and mess stays low.

Leak-Resistant Design

The antibacterial cotton wicking is designed to deliver a fresh taste for the life of the coil, and the leak-resistant housing helps keep e-liquid where it belongs. Fewer leaks mean a cleaner tank, a cleaner device, and less juice lost between fills.

Two Resistance Options

Pick your coil by the vape you want. The 0.4 ohm suits a warmer, more restricted sub-ohm draw at lower power. The 0.15 ohm is the cloud-chaser, made for open, airy DTL hits at higher wattage, the same style you would run on most DTL Tanks.

Designed for High-VG E-Liquid

Sub-ohm mesh coils drink liquid quickly, so high VG blends keep them fed and protect against dry hits. Save your 50/50 nic salts for small MTL kits. For this range, reach for a thicker, high-VG shortfill, and you will get the vapour and flavour these coils are built to produce.

Vaporesso GTR Coils Resistance Options

Both stocked resistances are mesh, and both sit firmly in sub-ohm territory, so this is really a question of how much power and airflow you want.

Most vapers will start with the 0.4 ohm. It is the more forgiving of the two, running at lower power for a warmer, tighter sub-ohm draw that still throws a decent cloud. It is easier on battery life and a sensible first choice if you are new to sub-ohm.

The 0.15 ohm is the specialist. It is built for higher-wattage, open DTL vaping and produces the biggest, warmest clouds of the pair. It rewards a higher-power device and a generous airflow setting, and it gets through e-liquid faster in return.

#buttons

• 0.15 Ohm
• 0.4 Ohm
  

Start at the low end of whichever range you choose and build up gradually until the flavour and vapour feel right.

How to Set Up the Vaporesso GTR Coils

Quick swap. Under two minutes.

1. Pull the used coil straight out of the base of the tank.

2. Prime it by dripping 4 to 5 drops of e-liquid directly onto the mesh and the cotton wicking ports.

3. Push the new coil firmly into the chamber until it seats fully.

4. Fill the tank with your high VG e-liquid.

5. Stand the filled tank upright for a full 10 minutes so the cotton wicks in completely before you vape.

6. Start at low wattage and step the power up gradually.

What's in the Vaporesso GTR Coils Box

Each pack contains three Vaporesso GTR replacement coils in your chosen resistance. There is no pod, no device, and no e-liquid included.

These are replacement heads only, so you will need a compatible Vaporesso FORZ tank and a bottle of juice to pair with them.

The Coil for the Vaporesso FORZ Tank

These push-fit sub-ohm mesh coils are built explicitly for the Vaporesso FORZ Tank 25, which is the flagship tank sitting on top of the rugged Vaporesso FORZ TX80 Kit.

What they will not fit is Vaporesso's pod-mod ranges. The GTR is a specific, standalone coil series. They will not fit the Target PM series, the LUXE XR range, or any devices using the GTX coil platform. Always check your exact model against the coil series before buying. If you are unsure, browse the full Vaporesso Range or check your device's manual for the coil series it takes.

About Vaporesso

Vaporesso is one of the most widely used coil makers in UK vaping, and its reputation rests largely on cross-device supply. A single coil platform running across dozens of devices means replacements stay easy to find and easy to match, which is exactly what you want from a consumable you buy again and again.

The brand's mesh coils are known for even heating and consistent flavour life, and the push-fit system has become a standard for quick, tool-free swaps. For sub-ohm vapers who value reliability and simple restocking, Vaporesso Coils are a safe, familiar pick.

Stock Up and Save

Coils are a running cost, so buying ahead makes sense. Keeping two or three packs in rotation means you are never caught with a burnt coil and no spare.

Pirate Vapes ships every coil order age-verified, with same-day dispatch on orders placed before 4 pm, and our Multi-Buy Deals help bring the per-coil cost down. Regular sub-ohm vapers can also lock in repeat savings through The Crow's Nest. TPD compliant. Over-18s only.

Conclusion

The Vaporesso GTR Coils are a straightforward, reliable replacement for the Vaporesso FORZ Tank 25, giving you a choice between the versatile 0.4 ohm and the cloud-focused 0.15 ohm, both mesh, both push-fit.

They suit high VG e-liquids and reward starting low on the wattage and building up. Just confirm your device takes this coil series before you order, since the listing name and the specs point to different Vaporesso lines. Stock a pack alongside your other Vape Accessories and keep a spare ready. You will find them, along with fast UK dispatch, at Pirate Vapes.

FAQs

What GTR Coils resistances are available?

Two: 0.15 ohm and 0.4 ohm, both mesh, sold in a pack of 3. The 0.4 ohm runs cooler at lower power; the 0.15 ohm is built for higher-wattage clouds.

Are GTR Coils push-fit or screw-in?

Push-fit. You press the coil into the tank base and pull it out to replace it. No threading and no tools needed.

What e-liquid works best with GTR Coils?

High VG sub-ohm e-liquids. Thicker, high-VG blends keep the mesh properly fed and give you the fullest vapour. Skip 50/50 nic salts with these.

Which devices do GTR Coils fit?

They are built exclusively for the Vaporesso FORZ Tank 25 (commonly found on the FORZ TX80 kit). They will not fit devices that use the GTX coil platform, such as the LUXE XR or Target series.

How long does a GTR Coil last?

It varies with your wattage, e-liquid, and how often you vape. Most sub-ohm mesh coils give roughly one to two weeks of daily use before flavour starts to fade. Sweeter, darker liquids tend to shorten that.

Do I need to prime a new GTR coil?

Yes. Add a few drops of e-liquid onto the cotton and let a filled pod stand for around 10 minutes first. Priming prevents dry hits and protects the coil from the very first pull.