Vaporesso X Moti Mini Coils

Vaporesso X Moti Mini Coils

A 0.35 ohm X35 mesh coil, sold in packs of five, built to run high-VG e-liquid through restricted DTL (RDTL) pod systems. The Vaporesso X Moti Mini Coils are a press-fit replacement made specifically for the Vaporesso X Mini pod kit and the co-branded MOTI X Mini, along with other pod systems built around the same X35 coil format.

There's no threading and no resistance guesswork: one confirmed 0.35 ohm option, matching what shipped in the box originally. It suits anyone who's worn through their original coil and wants an exact-fit replacement rather than a generic substitute. Browse the full range of Vaporesso Coils at Pirate Vapes.

Why vapers choose this:

• One confirmed resistance, zero guesswork. Pirate Vapes stocks the 0.35 ohm X35 exactly as it ships in the original X Mini and MOTI X Mini kits, so there's no resistance chart to check before ordering.

• Press-fit installation. No threading and no torque, just push the coil into the pod base until it seats.

• Built for high VG. The wicking is sized for thicker juice, so DTL and RDTL blends wick properly instead of flooding.

• Five coils per pack. Enough to cover several weeks of regular use before you need to reorder.

• Genuine Vaporesso part. Matches the original coil that shipped with the kit rather than a generic third-party fit.

Vaporesso X Moti Mini Coils Features

Mesh Coil for Even Vapour

Mesh coils heat more evenly across the surface than older round-wire coils, so flavour stays consistent from the first puff instead of tasting scorched on one side. That even spread is also part of why mesh coils tend to produce denser vapour at the same wattage as an old-style coil.

Designed for DTL Vaping

At 0.35 ohm, this coil isn't meant for a tight, cigarette-style draw. It's tuned for restricted DTL, a slightly airier pull that suits thicker e-liquid and bigger clouds than a standard MTL pod.

Suitable for High-VG E-Liquid

Built to wick liquid with a higher VG ratio without drying out. That matters at 0.35 ohm, where more heat needs a steady feed through the cotton or the coil scorches within a few refills. Stick to 50/50 or higher-VG juice, and consider Nic Salts at a lower strength if you're stepping down from a tighter draw.

Easy Press-Fit Replacement

Push the old coil out, push the new one in. There's no threading to strip and no wrench required, which matters if you're swapping coils on the move rather than at a bench.

Vaporesso X Moti Mini Coils Resistance Options

Pirate Vapes stocks the X35 coil in the standard 0.35 ohm resistance. This matches the original coil that comes with your Vaporesso X Mini or MOTI X Mini kit, giving you the same draw and cloud production every time.

#buttons

• 0.35 Ohm X35 Mesh

How to Set Up the Vaporesso X Moti Mini Coils

Quick swap. Under a minute once you've done it before.

1. Remove the empty pod from the device and pull the spent coil free of the base.

2. Press the new X35 coil firmly into the socket until it sits flush. No threading involved.

3. Fill the pod through the fill port with your chosen e-liquid, keeping to 50/50 or higher-VG juice.

4. Let the coil sit for six minutes before firing, giving the cotton time to fully saturate.

5. Reinsert the pod into the device until the magnetic connection clicks into place.

6. Press the firing button to vape. The device automatically detects the coil and adjusts power to the optimal level.

What's in the Vaporesso X Moti Mini Coils Box

Each pack contains five 0.35 ohm X35 mesh coils, individually sealed to keep them free of dust and residue before first use.

There's no pod, no device and no e-liquid included, so if your original pod has cracked or the magnetic connection has worn out, you'll need to order a Replacement Pod separately.

Built for the X Mini and MOTI X Pod Family

These coils are a confirmed fit for the Vaporesso X Mini pod kit and the co-branded MOTI X Mini pod system, plus any other device built around the X35 coil format. They will not fit Vaporesso's other pod ranges, which use different coil families entirely, so check your device model before ordering rather than assuming a universal fit.

Browse the full Pod Kits range at Pirate Vapes if you're shopping for a new device rather than a replacement coil.

About Vaporesso

Vaporesso has spent over a decade building pod systems and coil technology, and the X Mini sits at the accessible end of that range: compact, RDTL-focused, and built around a simpler mesh coil setup than the brand's larger sub-ohm kits.

The X35 coil in this pack is the standard fit for that mini form factor, aimed at vapers who want denser, DTL-style clouds without the wattage range or customisation of a full sub-ohm mod. It's a smaller, simpler branch of the Vaporesso lineup, built for ease over tinkering.

Stock Up and Save

A single pack lasts most RDTL vapers two to four weeks, depending on how many refills each coil sees before flavour drops off. Order two packs together, and you're covered well past the two-month mark without a mid-cycle scramble.

Pirate Vapes ships every coil pack in padded packaging so the mesh element arrives intact rather than rattling loose in a soft mailer. Age-verified checkout, TPD-compliant stock, over-18s only.

Conclusion

The Vaporesso X Moti Mini Coils give X Mini and MOTI X Mini owners a straightforward, exact-fit replacement without the guesswork of matching an unfamiliar coil to their pod. One confirmed 0.35 ohm resistance, press-fit installation and a pack of five make this a practical pickup rather than a considered purchase.

It suits high VG e-liquid and RDTL-style draws rather than a tight MTL pull, so check that matches how you vape before ordering. If your pod kit needs a different coil format, browse the full Vape Accessories range at Pirate Vapes.

FAQs

What resistance are the Vaporesso X Moti Mini Coils?

0.35 ohm. It's the standard X35 mesh coil resistance that ships with the Vaporesso X Mini and MOTI X Mini pod kits, and the only resistance currently stocked in this listing.

How many coils come in the pack?

Five. Enough to cover roughly two to four weeks of regular RDTL vaping before you need to reorder.

Are these coils compatible with the MOTI X Mini specifically?

Yes. The X35 coil fits both the Vaporesso X Mini and the co-branded MOTI X Mini, along with other pod systems built around the same coil format.

Can I use these coils with nic salts?

You can, though they're built for higher VG blends rather than the 50/50 nic salts most MTL pods use. For a proper nic salt setup, an MTL-focused kit and coil will suit better.

How long does each coil last?

Around one to two weeks with daily use, though sweeter or thicker juice can shorten that. Swap it out once the flavour flattens, or you notice a burnt taste.

Does this pack include a replacement pod?

No. The pack contains coils only, no pod and no device. You'll need to order a replacement pod separately if yours is cracked or leaking.